londride
03-04-2005, 03:47 PM
I bought a LED at Walmart that is the same as the ones that go on the back of semi-trucks.
I drilled a hole in the rear mudguard to stick the wiring harness through. I tapped the wires under the seat, Green is ground, brown is running light, green with stripe is brake.
I also installed a brake strobe and have it set so that the LED's strobes for about 5 seconds and then stays solid.
Here is a link to the strobe:
http://www.cruisercustomizing.com/detail.cfm?model_ID=1&Category_ID=5&manufacturer_ID=141&product_ID=6914
I drilled a hole in the rear mudguard to stick the wiring harness through. I tapped the wires under the seat, Green is ground, brown is running light, green with stripe is brake.
I also installed a brake strobe and have it set so that the LED's strobes for about 5 seconds and then stays solid.
Here is a link to the strobe:
http://www.cruisercustomizing.com/detail.cfm?model_ID=1&Category_ID=5&manufacturer_ID=141&product_ID=6914