February Rear Tip-Over Bar Group Buy (Gauging Interest)

[bygdawg]

Since the last group buy ended, several of you have contacted me about wanting a set of the bars. As my orders have already been filled, and I have no extras, I will be unable to help. However, I am posting this thread to see if we have enough interest for another run. I need at least 15 orders to do a production run. For those of you that have no idea what I'm talking about, this will help:

http://www.st-owners.com/forums/showthread.php?t=14622


You can find all of the information on the bars at the links above as well as performing a search with the key term being tip-over bar[s]. I won’t accept any money orders via mail and/or Paypal before the end of February. This should give any new folks a chance to get in on the group buy and any that didn’t make the last run a chance as well. I’ll be happy to answer any questions that you have for me. Thanks again to everyone that participated in the last group buy, and as always I hope you all continue to enjoy the bars. Hopefully, you won’t have to be putting them to use anytime soon, but they’ll be there if and when you ever do need them.


Ride Safe,
bygdawg

Additional bar shots (pardon the pun) including a few with MCL's Peg Lowers for passenger can be found at the following link. Please pay no attention to the Ninja. He just hangs out in my garage from time to time:

http://pics.midsouthspyders.com/listpics.asp?dir=Jay%5Fand%5FJennifer%5CMotorcycle %5CHonda+ST+1300


Some additional shots are mixed in with the Moonshine pictures:

http://pics.midsouthspyders.com/listpics.asp?dir=Jay%5Fand%5FJennifer%5CMotorcycle %5CMoonshine%5F2007%5FPart%5FI

http://pics.midsouthspyders.com/listpics.asp?dir=Jay%5Fand%5FJennifer%5CMotorcycle %5CMoonshine%5F2007%5FPart%5FII

More here:
http://pics.midsouthspyders.com/listpics.asp?dir=Jay%5Fand%5FJennifer%5CMotorcycle %5CHonda%5FST%5F1300%5FTip%2DOver%5FBars



There's even a little video footage about the bars at the link available in the following thread:
http://www.st-owners.com/forums/showthread.php?t=20891

The bars are made of solid 9/16th inch steel and have four weld points for improved rigidity. They are designed to work in conjunction with the front crash bars to protect the rear bags, trunk, panniers, and more importantly your leg should you tip-over or go down at slow speed. Although, I have had good success with crashes up to 35+ mph with them from others who have been involved in accidents with them on.

A few testimonials from others on the bars:

v65saber:

"bygdawg,

THANKS !!!!!!

I got the bars last on last month. Went to the MTF FLC2C III last weekend and my bad leg got me. Went to put ' ALLIS ' on the center stand and it was off balance the more up I pulled the more over she went OOOPS.

End result nada nil nothing not a mark on the bags, mirrors, no where. THEY WORK !!!!!"

----------------------------------------------------------------------------------------------

ShinySideUpAZ:

"Just got back from the hospital. On the way home from work a cager left turned in front of me at an intersection. Guy was a complete moron. In was in the intersection when he pulled out. I started braking and scrubbed off some speed when I hit a raised crack in the road. The bump caused the front wheel to lockup and the bike folded under me. I stayed on/with the bike for the twenty feet I slid.

Many thanks to Bygdawg and the tip over bars, they kept the bike from crushing my legs."

---------------------------------------------------------------------------------------------------

Brighteyesue:

"I have a 32" inseam and a wide Corbin seat and tiptoe it most times. I admit, my BlackBeauty is a heavy beaST to wheel around the garage. Yes I have laid her down, not at speed though. I HIGHLY recommend bygdawgs tipover bars. I hate to say this, but I have used them and more than once too. Not only have they saved my feet/legs, but my saddle bags too."

---------------------------------------------------------------------------------------------------

86Magna:

http://www.st-owners.com/forums/show...=tip-over+bars

"bygdawg,
Just wanted to thank-you for selling these tip-over wings. I bought a pair about 2 months not expecting to use them so soon. I was riding home yesterday afternoon when I got caught in a freak thunderstorm. I was exiting of the highway on the off ramp and the ST went out from under me. IMHO the tip-over wings at least save my leg and let me separate for my ST as I slid across the off ramp on my butt. I am a firm believer in ATGATT and with that the tip-over wings and most importantly the protection of God I walked away without a scratch or even a bruise. Riding today on my kids CRF 150 I have more bruises. This is my first accident in 21 years and 70,000 miles of riding. If this is the worst than I'll take it. Will keep everyone updated on how insurance checks out. My question is how much does it take to total an ST? Thanks again for the service you provide for those of us who ride ST's

Chris"

---------------------------------------------------------------------------------------------------

Herleman:

"I was doing about 40 to 45 mph when I had a disagreement with a large dog.

We both lost.

The bars did their job well (well the right side did, the left side was just loafing along in the air)."

---------------------------------------------------------------------------------------------------

brentster:

"Well I guess it had to happen.. I just wasn't prepared for it to occur only 10 days after I bought the bike.

I came to a stop on a street in Leesburg, VA and when I put my foot down, my right foot just kept on sliding. Turns out there was a bit of anti-freeze on the road and my dang foot magically hit the 6" puddle like some kind of friggin' miracle.

The bike tips to the right and as much as I tried, I just couldn't keep it from tipping over. DANG that monster is heavy!

The bike stalled out and it took a bit of effort to get it upright again.. After a few attempts to start, she fired right up. The engine guard cover and nut under the right side peg got a decent scuff. The right hard bag got nick'd on the bottom a bit, but it's not really noticeable unless you're looking for it. All things considered, I consider myself pretty lucky to have escaped with only minor cosmetic flaws.

Ironically, I had a conversation with my wife about the expense related to bygdawg's tip-over bars before I left the office and she asked me if they were really necessary. I guess now the answer is a resounding 'yes'."

----------------------------------------------------------------------------------------------------

XWINGER:

"All I can say is that if you have NOT purchased the crash bars offered on this site, DO IT. Can't remember who it was that made them. If someone knows who this is, please post a link. I was making a hard left turn on a BRAND NEW fron tire when it washe out on me. Was going maybe 15 - 20 MPH. NOT A SCRATCH except where there was supposed to be (front crash bar and rear crash bar). It would have cost a heck of a lot more to replace a saddlebag than these rear crash bars cost. Who knows what else would have gotten banged up (top case, seat, etc). Just remember, IT'S NOT IF, IT"S WHEN.

Someone please post link for these crash bars and EVERYONE get a pair.

Thanks"

---------------------------------------------------------------------------------------------------

2Dogs:

"S.S.,
I installed passenger lowering brackets after the Tip Over bars to give my pillion more room. This worked great. and... The T.O.Bars have saved more than the cost of the bars and the brackets 5X over...
+! bygdawg"

---------------------------------------------------------------------------------------------------

Machog:

"My tip over bars saved me when I fell stationery, at a gas station, some cat litter been put down to absorb a gas spill, turned into a person spill! Luckily there were plenty of people watching, so my embarassment was complete.

But saved me from buying an expensive right hand saddle bag, money well spent with BIGDAWGS.

I have the passanger & rider foot peg extensions from MCL and there is no interferance for either rider with the tip over bars. But, rider pegs now touch down in the twisties if my toecap doesn't scrape first.

Machog"

---------------------------------------------------------------------------------------------------

Raven:

"+1 on the BYGDAWG's! I know mine saved me a world of hurt!

My sometime passenger says it's more difficult to pivot one's foot when mounting or dismounting using the peg. However, they've stated they'd rather be slightly inconvenienced than remove the tip-over bar because they feel both safer having them there and safer for me having them there when solo."

"Got creamed by an idiot backing out of their driveway this morning on the way to work. I thought they'd stop at the end of their driveway to check for traffic but they didn't even look. That's what I get for thinking.

Fortunately I'd slowed up but didn't get the opportunity to do much in terms of avoidance except the brakes. ATGATT - that's a no brainer. Scraped my helmet, bit my lip and barked my shins on the fairing (ouch) but otherwise okay. Thank goodness for the rear crashbars/bag protectors b/c they kept the bike off me - I'd of probably broke my leg otherwise! Tore the back bumper cover off the cage and scraped up the right side of the bike as the rear end continued on around.

I'm pretty sure it's totalled. Front forks are crunched and the front wheel is jammed against the front casing. Can't get it to shift into neutral and the rear wheel won't roll with the clutch squeezed. Fuel pump isn't buzzing when you turn the key either. Only 4475 miles!

Thankfully there's another 06 at the dealer and they've pulled it aside for me so once the Raven is totalled I'll be back on the road with Raven2."

---------------------------------------------------------------------------------------------------

RTETR:

"I've not needed to use them since they've been on but they'd have saved me $400.00 damage back in 2005 when I laid it down gentle in a Calgary parkinglot... right smack on a cement parking curb!"

---------------------------------------------------------------------------------------------------

l3194ff:

"Well pulling into a parking lot full of people saw a few spaces open and decided to ride threw to back into the spot. Well making the slow right hand turn the bike just went over. Luckily the parking lot full of people was gracious enough to help pick up the bike. Only damage was a scrap to the tip over bar and scrap to the tip over wing. Oh yeah my pride."

---------------------------------------------------------------------------------------------------

John (STJMG):

Best farkle money spent. Saved me again last week when I leaned over the bike and forgot the kickstand was not down!! Not a mark on the bike!!!

Some day it will happen to you!!!!!!!

Hope you guys don't mind me posting your personal experiences. If you do, just let me know, and I'll happily remove the post. Also, if any of you have information that you want to share or additional information that you want to share about your experiences with the rear tip-over bars, feel free to do so here.

Thanks and Ride Safe,
bygdawg

P.S. Prices are as follows: If paying via paypal: $245 U.S. and $255 Canada
If paying via money order: $240 U.S. and $250 Canada

Note: The additional $5.00 helps cover part of the paypal fees.

Australia: $275, as it cost me around $30 to ship to that area. Europe and other parts of the world will probably be very close to the $275 figure. I have shipped to various parts of Canada, England, and even Singapore and Japan.

[Klackey]

Might want a set. Very good chance.

[bygdawg]

Also, I'm experimenting with a Rhino Lining/Coating process on the bars that should be completed in a week or two. When I'm finished, I'll post some pictures of what they look like with the Rhino Coating and get a feel for what you guys think about that. The Rhino promises to be even stronger than the powder coating, but I'm not sure exactly how it's going to look yet. I'm shooting for a look very similar to what you see on the front and rear racks of ATV's. Another added benefit of Rhino coating is that it would be totally waterproof and require very little in the way of cleaning.

Thanks,
bygdawg

[KrazyKooter]

Wow, we have to wait until September?

[bygdawg]

Thanks for catching that Kooter. I fixed it. :D

[azlife4me]

I am interested. The photo links don't work for me. Do you have any photos of these on a bike with the side bags on and the photo from the front or rear of the bike? If so, I would like to see them. Thanks

[bygdawg]

Try them again. I think I have them fixed.

Thanks,
bygdawg

[azlife4me]

Thanks for fixing the links. Great pictures. I am interested. Thanks.

[Grantizzle]

I am very much interested. count me in for the group buy if it happens.

[stovepipe]

I'm in.........

[Drgslayr]

Add me to the list.

Im picking up my ST in 2 weeks and this was the first on my list of upgrades.

[dongreen]

Yes, I want a set of the tip over bars. Just let me when to expect them and where to send check.

Thanks,

Don

[barracuda]

count me in too.

[azlife4me]

Sorry, I must have lost the post with the price shipped to U.S. What is the price for this group buy?

[bygdawg]

Very bottom of the first post in this thread. Look for the bold print.

[hoowasat]

Count me in, too. I want a set.

[bygdawg]

Note: I'll be out of town all weekend on a hunting trip. I'll return to the computer sometime Sunday night or Monday for sure.

Ride Safe,
bygdawg

[Highpockts]

Me too....

[Medicine Bear]

Bygdawg,

Sorry this isn't a "I want it" post because I haven't decided whether I'm going to keep the ST or not. However, let me put in my two cents on the flip side as one who has taken a fall without the bars. My crash was only about 10 mph. I fell over to the right. The first thing to hit was my right leg, then my shoulder, then the bike. My leg substituted for the bar and it was shattered. My shoulder was dislocated. The bike suffered no damage. Almost 5 months later I am limping and on my 49th therapy session tomorrow.

If any of you out there are wavering, for whatever reason, let me say that if I keep the ST there will be a set of bars installed before I take it out of the garage.

Fred :03biker: :confused:

[Jawgaboy]

Count me in. I know if I install these, I'll never need them. If I don't install them, Murphy's law will kick in.

[bygdawg]

Bygdawg,

Sorry this isn't a "I want it" post because I haven't decided whether I'm going to keep the ST or not. However, let me put in my two cents on the flip side as one who has taken a fall without the bars. My crash was only about 10 mph. I fell over to the right. The first thing to hit was my right leg, then my shoulder, then the bike. My leg substituted for the bar and it was shattered. My shoulder was dislocated. The bike suffered no damage. Almost 5 months later I am limping and on my 49th therapy session tomorrow.

If any of you out there are wavering, for whatever reason, let me say that if I keep the ST there will be a set of bars installed before I take it out of the garage.

Fred :03biker: :confused:

Sorry about the leg Fred. Your situation and the fact that I knew I'd let the bike tip-over at some point, is the very reason that I set out to design these bars. I simply wanted to create something that would prevent damage to the legs of the rider, the panniers, the exhaust, and the top box. Needless to say, I've been more than pleased with the results, and I'm very happy when I hear stories about the bars and how they've helped save someone's leg or damage to the bike. As we all know, damage to the bike can be repaired for enough $$$. However, it's the bodily damage that can't be repaired and/or replaced as easily. With the cost of replacing a pannier, I decided that it'd be in my best interest to just go ahead and design something that would insure that I didn't have to shell out that kind of money. Those panniers aren't cheap. Anyway, I'm glad to hear that you are on the mend, and I hope you decide to do what's best for you concerning the bike.

[gec343]

My riding buddy has ridden his 03 ST to Alaska the last two years in a row. He tipped his ST over several times while there, due to overloading (I think). The last time he visited me, he tipped his bike over in my driveway. It is scratched quite a bit, saddlebags, etc. He is considering buying a set of these tip over bars. I sure hope he does.

I ordered my set during the last run, but they have not been installed yet. The quality is excellent. I will be installing them this Thursday.:03biker:

[bygdawg]

I'm yet to have an unhappy customer. Be sure to let him know about the group buy, if he isn't aware of it already.

Thanks,
bygdawg

[gec343]

I'm yet to have an unhappy customer. Be sure to let him know about the group buy, if he isn't aware of it already.

Thanks,
bygdawg

Yes, he knows about it. He will be helping me install mine on Thursday, so maybe I'll be able to convince him to make the order. I also forwarded some of the reviews.:03biker: :03biker: :03biker: :03biker: :03biker: :03biker:

[peegee5344]

Hi Bygdawg,,,
count me in on the next batch.
I'm in Canada. Let me know where and how I can access your paypal when the time comes.
Tks.
Peter

[STScott]

I want a set...please add me to the list.

[hoowasat]

I already posted my desire to buy a set above. I'm wondering why Bygdawg doesn't make a large batch, and offer 'em up on eBay with a "buy it now" price.

[intercepter800]

I definitely want a set; just let me know how to proceed!

[helicopper]

Sign me up. I also sent you a pm.

Helicopper

[dogtown]

I'm in, let me know the details for Canada.

[jwayden]

Count me in too bygdawg!!! I think that rhino-lining is a good idea -- might match the dark plastic better, and it would probably be easier to repair than powder-coat. Just my 2 cents...

[Woody Moulton]

bygdog: I'd like a set of the tipover bars, thanks,
woody moulton

[bygdawg]

The list:

1. Shutterbug
2. Klackey
3. Grantizzle
4. stovepipe
5. Drgslayr
6. dongreen
7. barracuda
8. hoowasat
9. Highpockts
10. Jawgaboy
11. peegee5344
12. STScott
13. intercepter800
14. helicopper
15. dogtown
16. jwayden
17. Woody Moulton

I'll give it until the end of the week to see if we collect any more folks. Inevitably, I usually have two to three drop off the list when it actually comes time to collect the money, but maybe that won't be the case this time. I'll send out PM's this weekend with the payment details, probably on Sunday. I'll take funds and start production once all of the funds have been posted. It normally takes about 4 to 6 weeks from the day that I start production to completion. However, due to outsourcing my powder coating, I am sometimes pushed back for an extra week or two.

I'm supposed to get some pictures up of what the bars look like Rhino Coated later in the week. This will give everyone a chance to see those and see what they think. I agree that I think they would suffer less damage in the case of a tip-over as opposed to the powder, but we won't know how good they look or don't look until I get them back and get some shots. Stay tuned for that.

Ride Safe,
bygdawg

[Drgslayr]

Sunday Im taking off to pick up my ST.:06biker:

Ill be back Monday night / Tuesday Morning.

[bygdawg]

No worries. I may post the paypal info. earlier than Sunday, but I won't expect most to be posted via paypal or received via mail until the end of the week. I suppose I could go ahead and post the payment information and give folks the option of posting now or waiting until next week. How does that sound?

[bygdawg]

PM's for payment options have been sent. FYI: The sooner payments are all posted, the sooner I can start the production run and get them out to you guys.

Thanks,
bygdawg

[Don B]

bygdawg: add me to your list. I'll send you M.O. this weekend.

Don B.
2003 ST

[Don B]

Just curious. Is the black powder coating a close match to the black wheels on the '03 ST1300?

Don B.
'03 ST (the one with the FAST black wheels)

[grindz145]

Count me in for sure!

[bygdawg]

Don B,

The powder coat is a really good match, and it looks really slick. You can see some photos via the links on page one. Hope that helps. I added you to the list.


Ride Safe,
bygdawg

[hastings]

PM's for payment options have been sent. FYI: The sooner payments are all posted, the sooner I can start the production run and get them out to you guys.

Thanks,
bygdawg

Please add me to the list and forward PayPal payment info.
I just bought a new ST and believe in Murphy's law.
:07biker:

[gec343]

I am going to install my tip over bars today, but cannot seem to find the correct procedure directions, or guess I mean the shortcut.:03biker:

[Kelly Cox]

Been wondering, how'd you pull off that wheely on an ST???? Speedbump and good timing? First gear clutch pop?

[bygdawg]

First gear clutch pop at high rev and some nerve pills to take the edge off. Just joking about the pills. :D

[Woody Moulton]

bygdawg
I'd like the bars. I get paid Fri. Feb 8th. Can I send you an M.O. then?

[Grantizzle]

i am just waiting for the funds to clear in my paypal before i shoot them off to you. should be done by wednesday.

[spike120021]

I would like a pair as well. Can you send me a p.m. and I'll pay by paypal right away. Thanks

[bygdawg]

You've got a PM Spike.

I still have about 7 of you that I need to hear from. I'll probably close the group buy on Wed. of this week. I will need payment posted or money order sent by that time. I'd like to get production started by the end of the week. If anyone else wants in or out, now is the time to speak up.

Looks like production may not start until next week. I've got a few folks that are posting or mailing funds this Friday. It will be at least Tuesday before I have a hard count. If I haven't received money by that time, I will have to mark you as unpaid on the list, and you will not be considered part of the group buy. I will have a few extra sets outside of the group buy that will go for $255 for US buyers.

Ride Safe,
bygdawg

[Don B]

Been wondering, how'd you pull off that wheely on an ST???? Speedbump and good timing? First gear clutch pop?

All it takes (if you've got the nerve) is to accelerate normally in 1st gear until you get into the power band, then WHACK IT OPEN - it doesn't take any fancy techniques with the clutch, just be ready for the front end to riiISE :D!

Be Careful out there.

Don B.
'03 ST

[bygdawg]

Here are the pics. of what the rhino coating looks like:

http://pics.midsouthspyders.com/listpics.asp?a=show&ID=15037

http://pics.midsouthspyders.com/listpics.asp?a=show&ID=15038

http://pics.midsouthspyders.com/listpics.asp?a=show&ID=15039

[STindy05]

Here are the pics. of what the rhino coating looks like:

http://pics.midsouthspyders.com/listpics.asp?a=show&ID=15037

http://pics.midsouthspyders.com/listpics.asp?a=show&ID=15038

http://pics.midsouthspyders.com/listpics.asp?a=show&ID=15039

Ok...now run out and put it on the bike so we can see it installed. Ok...you can just hold it up there. Not sure if I like it or not.

[hoowasat]

If mine are going to look that (rhino), I want to cancel my order. I like the powder coat finish better.

[bygdawg]

Yeah...That's what they're all going to look like. :capwin: Seriously though, I tried this on a couple to get some feedback. IF you don't want Rhino, you don't have to have Rhino. I'm experimenting. After all, that's how I got where I am know. :D I may even try another Rhino coater to see if I get different results between the two. I was actually going for a look closer to this:
http://www.piratesk12site.net/stpage5.jpg

[stinger_06]

I would like a set.......Powder Coated

Debbie
:06biker:
aka STinger_06

[bygdawg]

You've got mail. :hat1:

[helicopper]

Yeah, I would prefer the powder coating at this point.

Thanks,

[intercepter800]

If the Rhino is as roughly textured as shown, I prefer powder coat. If they can get a softer texture, then I'm in.

I can always get them Line-X coated here - not as rough.

Ken

[dogtown]

powder coat for me bygdawg, thanks.

[peegee5344]

Hopefully its not going to be a big deal having either or,, but unless the Rhino coating is a little less aggressive looking,, I think I would prefer the powder coating as well please. It may be the pics, but I think the smoother texture of the P/C fits better with the bike. Of course, I'm open to your opinion as you experiment prior to the final production.

Thanks for the effort!

Peter

[bygdawg]

I'll keep you guys posted as I exp. with the two that I currently have. At the end of the production run, I will get them all powder coated unless you specify otherwise.

Thanks,
bygdawg

[bygdawg]

Just so we can get an early start, I'm going to close the group buy at midnight on Tuesday the 12th. So far, I have 19 individuals that have paid, and I'm awaiting funds from three others. My goal is to order the steel this week and start production by the end of the week or the first of next week.

Thanks to everyone who participated in the group buy.

Ride Safe,
bygdawg

[linda e]

I pm'd you bydawg!

[JMS]

Yep, put me down for a powder coated set. Sent the money by Paypal today.

Thanks

[linda e]

Sent you a paypal!
Linda E

[bygdawg]

If you have made payment via paypal or money order and it has been received, I will have you marked as paid in full beside your name. Thanks. Bygdawg

The list:

1. Shutterbug - Paid in full via paypal.
2. Klackey - Paid in full via money order.
3. Grantizzle - Paid in full via paypal.
4. stovepipe - Paid in full via money order.
5. Drgslayr - Paid in full via paypal.
6. dongreen - Paid in full via money order.
7. barracuda - Paid in full via money order.
8. hoowasat - Paid in full via paypal.
9. Highpockts - Paid in full via paypal.
10. Jawgaboy - Paid in full via money order.
11. peegee5344 - Paid in full via paypal.
12. STScott - Paid in full via paypal.
13. intercepter800 - Paid in full via paypal.
14. helicopper - Paid in full via paypal.
15. dogtown - Paid in full via money order.
16. jwayden - Paid in full via paypal.
17. Woody Moulton - Paid in full via paypal.
18. Don B - Paid in full via money order.
19. grindz145 - Paid in full via paypal.
20. hastings - Paid in full via paypal.
21. spike120021 - Paid in full via paypal.
22. stinger_06 - Paid in full via paypal.
23. linda e - Paid in full via paypal.
24. JMS - Paid in full via paypal.

Thanks for the prompt payment fellas. Remember, the quicker everyone pays, the quicker I can start production.

In all fairness, I have decided to give everyone until Wed. of this coming week, Feb. 13th for funds to have either arrived via paypal or money order. That should be enough time for anyone needing to wait until the end of the week to mail out money orders. It isn't fair for all of those that have gone ahead and paid to have to wait any longer than that. This will mean that production will start on or near the end of next week. You can expect 4 to 6 weeks until the bars are completed from that date. I will ship as soon as I pick them up from the powder coater and get them packaged, and I will contact you with a delivery confirmation once they ship.

Thanks,
bygdawg

[bygdawg]

Group Buy is Closed.

As always, I will have a few extra sets on a first come first serve basis. These will be available to non group buy folks for $255 shipped inside the U.S. or $265 shipped to Canada. Outside of those two places additional charges will apply. I will get the steel ordered today, and hopefully it will arrive by the end of the week so that production can begin next week. Once the bars are completed and powder coated, I will box them up and contact you with a delivery confirmation number the day that they ship to your location. Thanks to everyone that has participated in the group buy. I'm sure you'll be very pleased with them, especially if you ever have to put them to use.

Ride Safe,
bygdawg

[bygdawg]

Update: Steel should be in this week.

[bygdawg]

Update:

I'm ahead of schedule. I've got to prep the bars to go to the powder coaters, and I won't know how long he'll be on them until I drop them off. I am pleased that the steel actually arrived on time, and I was able to get them together ahead of schedule. Hopefully, I can get them dropped off on Monday, and he can finish them by the end of the week. However, I don't want to make any promises yet because I never know if it will be able to get on them right away until I drop them off. My goal is to ship by mid March, but hopefully I can beat that.

Update:

I got the bars prepped and ready for the powder. During the prep process, I noticed a few spots on some of the bars that I want to buff on. You probably would have never noticed with the powder on them, but I would know. So, with that said, I'll be getting all of the ones with the spots buffed tomorrow and then moving onto the powder coating. I'll update again once I find out how long it will take the coater to finish his part of the job.


Ride Safe,
bygdawg

[AZHeadhunter]

Bygdawg,

I haven't been on the forum in awhile and just learned of your bars this past weekend from Raven. If you have an extra set, I'd be interested. Just let me know where to send the money. If not, I guess I'll have to wait until the next Group Buy. In any even, please let me know.

Best,

AZHeadhunter

[bygdawg]

You've got mail.

[STed Fast]

Any sets left? Sorry for the tardiness. Just discovered the buy.

[bygdawg]

I've got a few folks already sending money to reserve a couple of the extras. I'll have to get back to you once I crunch the numbers again.

Thanks,
bygdawg

[STed Fast]

Thanks for the prompt reply. I'm definetly in, if you have some left. Email: edward.d @telus.net

[CTbrit]

...way, way late but will not be a dollar short...if after 'crunching the numbers' you have another set available please let me know...if not please keep me on file for the next buy .. it seems that you produce 2 or 3 times a year.

Thanks.

John.

[bygdawg]

Update:

I plan to drop the bars at the powder coaters on Friday of this week (02/29/08). I should be able to pick them up the following Friday (03/07/08). I have plans to ship no later than 03/12/08). What all of this means is that, baring something going wrong, most of you can expect to have your bars by no later than March 17th or 18th. I would expect some to arrive earlier than that. However, the Canadian ones will probably take a bit longer to arrive. Again, I want to thank everyone who has participated in the group buy, and I assure you that you will be very happy with the bars, especially if you ever have to put them to use.

Ride Safe,
bygdawg

P.S. Be sure, once your package arrives, to locate the mounting instructions and stainless bolts before discarding any packaging materials. I will contact you with a delivery confirmation once the bars ship from my location.

[bygdawg]

You've got mail CTbrit.

[helicopper]

I don't know why I am excited to get these. I hope to never put them to use.

[bygdawg]

As a responsible citizen, I'm sure you wouldn't ride around without insurance. In a small way, these are a lot like insurance or clothes. You wouldn't want to ride around without them, unless you're FineWest (concerning the riding without clothes that is). :crackup And much like insurance, you won't really need them until you "NEED" them. At that point, you'll be really glad you have them. Then again, here's to hoping you actually never do need them :capwin: .

Ride Safe,
bygdawg

[STed Fast]

Thanks for looking after me. I certainly appreciate it at this late date!

[bygdawg]

No sweat...

If you have made payment via paypal or money order and it has been received, I will have you marked as paid in full beside your name. Thanks. Bygdawg

The list:

1. Shutterbug - Paid in full via paypal.
2. Klackey - Paid in full via money order.
3. Grantizzle - Paid in full via paypal.
4. stovepipe - Paid in full via money order.
5. Drgslayr - Paid in full via paypal.
6. dongreen - Paid in full via money order.
7. barracuda - Paid in full via money order.
8. hoowasat - Paid in full via paypal.
9. Highpockts - Paid in full via paypal.
10. Jawgaboy - Paid in full via money order.
11. peegee5344 - Paid in full via paypal.
12. STScott - Paid in full via paypal.
13. intercepter800 - Paid in full via paypal.
14. helicopper - Paid in full via paypal.
15. dogtown - Paid in full via money order.
16. jwayden - Paid in full via paypal.
17. Woody Moulton - Paid in full via paypal.
18. Don B - Paid in full via money order.
19. grindz145 - Paid in full via paypal.
20. hastings - Paid in full via paypal.
21. spike120021 - Paid in full via paypal.
22. stinger_06 - Paid in full via paypal.
23. linda e - Paid in full via paypal.
24. JMS - Paid in full via paypal.
25. McSpeedy - Paid in full via paypal.
26. katapult - Payment pending via paypal.
27. STed Fast - Paid in full via paypal.

[STindy05]

Dang...look at that production run. Heck...looks like you ought to make them full time;)

[bygdawg]

LOL...As sure as I quit my day job to do that, it'd be like a bust crop season for you guys where it rains all season and floods everything out, except it'd be a drought in my case. :crackup

[bygdawg]

If you have made payment via paypal or money order and it has been received, I will have you marked as paid in full beside your name. Thanks. Bygdawg

The list:

1. Shutterbug - Paid in full via paypal.
2. Klackey - Paid in full via money order.
3. Grantizzle - Paid in full via paypal.
4. stovepipe - Paid in full via money order.
5. Drgslayr - Paid in full via paypal.
6. dongreen - Paid in full via money order.
7. barracuda - Paid in full via money order.
8. hoowasat - Paid in full via paypal.
9. Highpockts - Paid in full via paypal.
10. Jawgaboy - Paid in full via money order.
11. peegee5344 - Paid in full via paypal.
12. STScott - Paid in full via paypal.
13. intercepter800 - Paid in full via paypal.
14. helicopper - Paid in full via paypal.
15. dogtown - Paid in full via money order.
16. jwayden - Paid in full via paypal.
17. Woody Moulton - Paid in full via paypal.
18. Don B - Paid in full via money order.
19. grindz145 - Paid in full via paypal.
20. hastings - Paid in full via paypal.
21. spike120021 - Paid in full via paypal.
22. stinger_06 - Paid in full via paypal.
23. linda e - Paid in full via paypal.
24. JMS - Paid in full via paypal.
25. McSpeedy - Paid in full via paypal.
26. katapult - Payment pending via paypal.
27. STed Fast - Paid in full via paypal.
28. CTbrit - Paid in full via paypal.

[bygdawg]

Below are the new pictures of the new pro-coat lining on the bars. Let me know what you guys think. And no...your bars are coming powder coated unless you specify otherwise. Personally, I like it, and this set will be going on my bike as I've still been running the 1/2 inch bars instead of the newer 9/16ths.

Thanks,
bygdawg

[hoowasat]

I'll stay with the smooth powder coat finish ... easier to clean. Thanx!

[dreddd2000]

What would the advantage of the new coating be over the powder coat?

[bygdawg]

Basically that it is rubberized and tougher. I think it would help dampen a tip-over a bit, but we aren't talking major dampening. I think it would be as easy to clean, if not easier. It's about the same money either way, so it really doesn't make a difference price wise. I guess it could be argued that you couldn't touch it up as easily if the wreck / tip-over actually caused the rubberized part to tear away from the steel. I'm not sure how likely that is to happen in a simple tip-over. In either case, a wreck at speed is going to peel away whatever coating is on there. The coating forms a really strong protective barrier over the steel to eliminate any possibility of corrosion. However, powder does this as well, but if you get a nick in the powder and don't repair it, you will have exposed steel. And we all know that steel that is exposed long enough to the elements will begin to show signs of rust. With the powder coated bars though, all you have to do if you get a nick is pick up a bottle of universal gloss black touch-up from any parts store and touch-up the damaged spot.

[CDNolddude]

I like the powder coated ones I got off of you last year much better for looks
although this newer look probably wouldn't have stopped me from buying. The smoother finish of the normal ones blends in with the bike better..

[shezonit]

Just so I don't have to read the entire thread....... Will these fit on a '96 ST1100?
Still time to order?
Thanks for info. These look great!

[grindz145]

Thats a hard decision I for one like the rubberized undercoat setup, but I like the way the powder coat looks with the rest of the bike.

[bygdawg]

Just so I don't have to read the entire thread....... Will these fit on a '96 ST1100?
Still time to order?
Thanks for info. These look great!


Sorry, but they only work on the 1300.

[Rolling Thunder]

Put me down as a definite yes, please.

[bygdawg]

You've got mail.

If you have made payment via paypal or money order and it has been received, I will have you marked as paid in full beside your name. Thanks. Bygdawg

The list:

1. Shutterbug - Paid in full via paypal.
2. Klackey - Paid in full via money order.
3. Grantizzle - Paid in full via paypal.
4. stovepipe - Paid in full via money order.
5. Drgslayr - Paid in full via paypal.
6. dongreen - Paid in full via money order.
7. barracuda - Paid in full via money order.
8. hoowasat - Paid in full via paypal.
9. Highpockts - Paid in full via paypal.
10. Jawgaboy - Paid in full via money order.
11. peegee5344 - Paid in full via paypal.
12. STScott - Paid in full via paypal.
13. intercepter800 - Paid in full via paypal.
14. helicopper - Paid in full via paypal.
15. dogtown - Paid in full via money order.
16. jwayden - Paid in full via paypal.
17. Woody Moulton - Paid in full via paypal.
18. Don B - Paid in full via money order.
19. grindz145 - Paid in full via paypal.
20. hastings - Paid in full via paypal.
21. spike120021 - Paid in full via paypal.
22. stinger_06 - Paid in full via paypal.
23. linda e - Paid in full via paypal.
24. JMS - Paid in full via paypal.
25. McSpeedy - Paid in full via paypal.
26. katapult - Payment pending via paypal.
27. STed Fast - Paid in full via paypal.
28. CTbrit - Paid in full via paypal.

[krotchrocketgrampa]

what about a march 08 list ?

[bygdawg]

I will check into that after I get all of these orders shipped. I have had several people contact me after this group buy was sold out, but we will have to have at least 15 to do another production run. Again, look for another group buy thread in late March or early April. Thanks for your interest.

Ride Safe,
bygdawg

[azlife4me]

I like the powder coating much better.

[STBNE]

So... still nothing for the ST1100s'?:(

[bygdawg]

Sorry but that would be a negative. Seems like such a great project for someone else to pickup. I've had at least 50 1100 owners contact me over the past couple of months interested in a set. I looked at the 1100 design, and I just can't see a design that would not require some type of drilling and/or cutting to panels on the bike. The great thing about my bars for the 1300 is that they are bolt on in about 15 minutes of time. At one time Les Johns was looking into something for the 1100, but I'm not sure if anything ever came to fruition with that project.

[ST_John]

Hi,

I'm definitely interested in a set. Just let me know when the next order is ready and I'll submit payment via paypal.

Thanks,
John

[bygdawg]

FYI...All bars will ship today. Thanks for your participation in the group buy, and as always, hopefully you'll never have to use them. However, if and when you should ever need them, they'll be there for you. Thanks again.

Ride Safe,
bygdawg

[CTbrit]

FYI...All bars will ship today.

Thanks for the update, great news...:wave1: ....can't wait to get them on.

Nice doin' business with the 'dawg

[stinger_06]

:yr1: Can't wait to get mine! Thanks for the update.

Debbie in NC
:06biker:

[bygdawg]

I expect a mid-week delivery for most and end of the week for west coasters. You Canadians may take a couple of weeks, but I've been having good luck with them getting to Canada fairly quickly.

Ride Safe,
bygdawg

[stinger_06]

bygdawg........Received my bars today & just finished putting them on.......by myself I might add. Easy as pie. You give great directions & the new bolts went in easy, no problems at all & they look GREAT. Thank you for a quality product & fast shipping.:bow1: :bow1: :bow1:

Debbie in NC:bannana

[hoowasat]

Got mine today, too. Haven't installed them yet. Great looking product and good packaging.

[Drgslayr]

Just got dilivered. Looks Great thank you.

[barracuda]

just got mine also, they look great.

[Woody Moulton]

bygdawg,
Got mine today. Good directions, easy install, look great, Thanks :bow1:

[helicopper]

Got mine too. I'll put them on tonight after work. (I got them installed. Very easy thanks to the instructions. They're purdy!)

[sandalio1]

I'm in, let me know the details.:03biker:

[hoowasat]

I'm in, let me know the details.:03biker:

Sorry, but ya' missed out on this "group buy" ... however, the next one has already started at the following link ...
http://www.st-owners.com/forums/showthread.php?t=36750

BTW, WELCOME to the forum!

[bygdawg]

Glad everyone is getting them and you are all happy. I hope you guys never get the chance to use them, but they'll be there for you if you ever do need them.

Ride Safe,
bygdawg

P.S. I'll be out of town all week on Spring Break vacation.

[dkwflight]

Hi I am interested in the bars.
Post a price and I'll send a check.

[hoowasat]

Read my post #111 above to get on board with the next batch. This batch is finished, shipped, and many of us have already installed 'em.

[Don B]

Got my tip-over bars yesterday. Went out to the garage after dinner this eve, rolled the ST out to the driveway, removed the bags, installed the bars, put it back in the garage. Obviously, I haven't found out yet how much faSTer she'll go, but they sure do look purdy. :) :) :)

[spike120021]

Received mine on Monday and they look great.:D Can't wait to see them on the bike and hope they never get used. Thanks again for a great job :bow1:

[STBNE]

Glad everyone is getting them and you are all happy. I hope you guys never get the chance to use them, but they'll be there for you if you ever do need them.

Ride Safe,
bygdawg

P.S. I'll be out of town all week on Spring Break vacation.

Not everyone is "getting them":rolleyes:
So hopefully by the next group buy we'll see something for the ST1100s.:mad:

[grindz145]

I got my bars a while ago and never got a chance to tell you how great they are! The welds are beautiful. Nice solid steel. The powder coat is perfect and the installation couldn't be easier. gotta hand it to you, theyre awesome!

[bygdawg]

Thanks Grindz. :03biker:

[intercepter800]

Just got mine today (March 18) in Ontario, Canada so shipping to Canada is not that long.

The quality is awesome!

Thanks,
Ken

[Klackey]

I got mine last week. They are great! Quality is outstanding, and great design. Thanks.

[bygdawg]

Great. Glad to see the Canada shipments are arriving. I would imagine you guys have a few more weeks of cold weather to get them on before hitting the open roads.

Ride Safe,
bygdawg

[STindy05]

Jay....I never recieved mine;)

[jwayden]

Got the bars last week and installed them last weekend. I think the Pro-Coat finish looks great!!

Thanks bygdawg -- for a great product and great service too!! :hat1:
.
.

[bygdawg]

Jay....I never recieved mine;)

:crackup :crackup :crackup

Got the bars last week and installed them last weekend. I think the Pro-Coat finish looks great!!

Thanks bygdawg -- for a great product and great service too!! :hat1:
.
.

Glad to hear it. I still haven't got my set on yet, as we've been doing the whole moving thing over the past couple of weeks.

Ride Safe,
bygdawg

[STindy05]

You've got mail.

If you have made payment via paypal or money order and it has been received, I will have you marked as paid in full beside your name. Thanks. Bygdawg

The list:

1. Shutterbug - Paid in full via paypal.
2. Klackey - Paid in full via money order.
3. Grantizzle - Paid in full via paypal.
4. stovepipe - Paid in full via money order.
5. Drgslayr - Paid in full via paypal.
6. dongreen - Paid in full via money order.
7. barracuda - Paid in full via money order.
8. hoowasat - Paid in full via paypal.
9. Highpockts - Paid in full via paypal.
10. Jawgaboy - Paid in full via money order.
11. peegee5344 - Paid in full via paypal.
12. STScott - Paid in full via paypal.
13. intercepter800 - Paid in full via paypal.
14. helicopper - Paid in full via paypal.
15. dogtown - Paid in full via money order.
16. jwayden - Paid in full via paypal.
17. STindy05 - Paid in full Via a line of BS
17. Woody Moulton - Paid in full via paypal.
18. Don B - Paid in full via money order.
19. grindz145 - Paid in full via paypal.
20. hastings - Paid in full via paypal.
21. spike120021 - Paid in full via paypal.
22. stinger_06 - Paid in full via paypal.
23. linda e - Paid in full via paypal.
24. JMS - Paid in full via paypal.
25. McSpeedy - Paid in full via paypal.
26. katapult - Payment pending via paypal.
27. STed Fast - Paid in full via paypal.
28. CTbrit - Paid in full via paypal.

You had better double check the list. I think you missed me. :D

[bygdawg]

That looks about right. :crackup

[STed Fast]

Received and mounted easily. Quality great. Thanks.

[peegee5344]

Still haven't received mine yet Bygdawg,,, but with the weather and predicted continued cold temps and more snow coming,, I'll be patient. Almost too cold to work in the garage anyway.
I'll let you know when they arrive.

:)

[llbaker2]

I thought I put expressed my interest in this group buy by I searched for my name with no luck. If its not to late I would like a set

llbaker2@cox.net

[bygdawg]

You did. You replied to the April group buy thread that is going on now.

Thanks,
bygdawg

[peegee5344]

Gottem yesterday Jay,,
Look fantastic!
:bow1:

Thank you sir,, hope to never need 'em!

Take care.

Peegee
:06biker: :07biker:

[bygdawg]

That's great. Glad to hear it.

Ride Safe,
bygdawg

[bjballsr]

I'd like to place an order for your tip over bars. Please send the details. Thanks.

You can email me at mstrbjb@bellsouth.net or reply here. Thanks!

:bow1:

[bygdawg]

See the August group buy please, and post your interest there.

Ride Safe,
bygdawg