ST1300 Front Wheel Disc's

[Byron]

I'm putting together a spare set of wheels and need both front disc's. If you have any or have any leads that I could follow-up on it would be appreciated.

Thanks,

[George]

Jeff B. did a bunch of research when he was having his brake problem. Jeff, got any leads??

[wjbertrand]

I had a "wanted" post here and searched a bunch of salvage yards and could not come up with an OEM disk. Galfer does not offer an aftermarket disk for the 1300 but EBC does, forget the PN. You can buy two EBC disks for only a little more than the price of one new OEM.

In the end, with much persistence on my part, Honda finally agreed to warranty my warped one and so I gave up the search and never bought the EBCs.

[Byron]

I'm running into the same problem. Can't seem to find any used ST1300 rotors. As Jeff noted no Galfer and 2 EBC's for nearly the price of a single Honda rotor.

I didn't want to spend this much but may have to go the EBC route.

[Gonzo]

I've been trying to get together a spare set, too. I have the whole front but nothing in the rear yet.

gonzo

[nm6r]

I have been looking for a complete ABS front wheel for almost 3 years. All I ever see for sale is a naked front wheel so I have been watching for set of front rotors and ABS pulser ring for the last 2 years.

Everyone thinks they are getting a good deal on a front wheel only to find out it's worthless as a spare without rotors and pulser ring mounted.

Ray

[Byron]

Well with a little luck and a bit of waiting I have my complete front wheel. I just won it on eBay. I paid less for a complete wheel with disc's and axle than the rotors would have been alone, not counting mounting bolts. I haven't picked it up yet but hope to get it this week.

For those that are still looking, hang in there.

[Gonzo]

I'm just behind you in the effort, Byron. I have the bare front wheel, and I have won a complete rear wheel with rotor and ring. I also have won a spare set of axles (good for doing the balancing before disassembly of the moto).

Both of them have a nearly new tire, so for a spare set, at least I don't have to buy tires for them just yet.

[Byron]

Cancel the want, finally completed the set.

It wasn't without some effort and $. Bought front wheel off eBay with supposedly good disc. Turns out one was hit and slightly bent. I tried my best to get it straight but couldn't get better than .003" run-out. I bit the bullet and ordered a new disc to replace it. Came in yesterday and already on the bike with a new set of PR2's ready for the ride to WeSTOC.