NJ Tech Day

[rulbe]

Trying to find out if there would be an interest in a south NJ tech day. I have a large garage (6 car), No Mar tire changer, balancer, compressor, tools and service manuals for ST1100 and ST1300. Let me know if there would be an interest sometime in April. Also have a large gas grill for hamburgers!

Randy

[mitchnj]

Hi Randy,
I would definitley be interested in learning more about my bike. In particular how the electrical system works ,how to install accessories and avoid trips to the dealer!
Mitch


Trying to find out if there would be an interest in a south NJ tech day. I have a large garage (6 car), No Mar tire changer, balancer, compressor, tools and service manuals for ST1100 and ST1300. Let me know if there would be an interest sometime in April. Also have a large gas grill for hamburgers!

Randy

[Northeast Rider]

Hmmm, south Jersey, a little far, but I bet you get some folks to respond. and I would'nt mind riding with Del and Pan American and Rico and STeve1300 and a whole bunch a good guys I've ridden with when I was in Philly. I'll keep an eye out and see when this gets a date, great offer, I'd like to try to do the FPR from Turbo Tom's

[TRNewtown]

I am from across the Delaware River, but I would like to attend. I did most of the work on my ST1100, but now have a ST1300 and could use some moral support with some of the maintenance work. And if anyone has a ST1100, I could donate some misc items (oil filters, etc.)

Tom

[MikesBlackbird]

I am in Jamison, Pa. Not too far from Tom. I have an 05 with about 3500 miles and really don't have any tech related projects pending, but would be interested in getting together. I did just order and should receive today a set of 2 Bros pipes, and have thought about the FPR upgrade and a K&N, but won't do that until I get some experience with the new pipes.

Thanks for the offer.

[SteveST1300]

Randy as we spoke about last night I would like to do the throttle valve synch. Guys Randy is not kidding he has a great set up!:03biker:

[rosast1300]

I'm in Central Jersey and don't have any big projects pending other than coolant change and basic maintenance, but would like to check it out if work allows.

[st1300r]

Nothing big planned in the maintenance dept but would be interested in learning some wrenching skills. Always up for some good grillage :)

[DWJ Honda]

I'm in Hunterdon County but would enjoy coming as well.

[STBNE]

I'd be interested too...I'm in Mercer cnty so S.Jersey...no sweat...but if you do this on a Sat....I wont be able to make it...gotta work sat's..:biker: :biker: :biker:

[Del]

Randy I am in, if for no other reason than to see the garage that caused you so much frustration. Of course my ST always needs something, thanks for the offer. Michael

[rulbe]

Hey guys
How does April 5 or April 26 sound? Let me know what dates will work for all of you. Also maybe start a list of work wanted to be completed. My thoughts would be to start around 9 am and finish when we get done. I do have a couple M/C jacks.

Randy :)

[mitchnj]

Hey guys
How does April 5 or April 26 sound? Let me know what dates will work for all of you. Also maybe start a list of work wanted to be completed. My thoughts would be to start around 9 am and finish when we get done. I do have a couple M/C jacks.

Randy :)

Randy,
Do you think you could help me install heated grips?
I'm good for either day.

[rulbe]

Mitch

Are they Honda factory grips? I installed a set on my ST. You will need the quartet harness to connect to. To answer your question is yes!

Randy

[rulbe]

Mike

Just so you know what the house looks like here are a couple photos.

Enjoy!

Randy

[mitchnj]

Hi Randy!

Yes they are Honda factory grips. Was it a pain / difficult to install? I understand inorder to install heated grips the entire front end needs to be disassembled. My local dealer labor charge is almost $400! (real bummer after buying a new bike!) The dealer just ordered the parts including the harness. I also ordered a Stebel horn. I'm mechanically challenged so if your comfortable helping me out I'll cancel the install w/ the dealer and just pick up the parts. I'd really appreciate it and would be happy to pass some of the savings on to you. Just let me know what time / day to show up!

Thanks,
Mitch

Mitch

Are they Honda factory grips? I installed a set on my ST. You will need the quartet harness to connect to. To answer your question is yes!

Randy

[SteveST1300]

The 26th works for me.:03biker:

[bunson]

Hi Randy!

Yes they are Honda factory grips. Was it a pain / difficult to install? I understand inorder to install heated grips the entire front end needs to be disassembled. My local dealer labor charge is almost $400! (real bummer after buying a new bike!) The dealer just ordered the parts including the harness. Thanks,
Mitch

The front does not need to be disassembled. Depending on the size of your hands you may to take the plastic off. The quote must be for labor & parts.
I'm keeping this event on my calendar as a possible place to hang out, shouldn't any work done.

[rulbe]

Mitch

bunson is correct about taking the entire front plastic off. I took it partially off to do some additional additions. I sure with everyone's help we can get them installed and actually work!

I am shooting for April 26 date. Next question is starting time let me know what would be good for everyone ( I am an early AM person) .

Here is a list I compiled let me know if I missed or if you might be a maybe. Also if you have a specific project. I do have access to special tools just need to know which ones. I also have two sets of vacuum gauges for throttle body sync

Mitchnj -
Northeast Rider -
TRNewtown -
MikesBlackbird -
SteveST1300 -
rosast1300 -
st1300r -
DWJ Honda -
Del -
bunson -

Thanks and look forward to meeting you all!

Randy :)

[mitchnj]

Randy,

Ok great Sat April 26 is good for me. Can we plan for 9 AM?

Dennis, would you like to ride down together since I'm along the way? Looks like its going to be 287 south to Turnpike south about 90 min. Since I'm right off 287 could you meet me at about 7:30?

Mitch

[Del]

Mike

Just so you know what the house looks like here are a couple photos.

Enjoy!

Randy

Randy that was very funny, I was laughing out loud.
As of now both dates are good for me. And I will be happyto supply the meat for the grill.

[rulbe]

Thanks Mike!

Seems that we have the makings of a great day! A little M/C work and food to go with it! :eat1: What more could anyone ask for?

Start time will be at 9 am or when you arrive.

Call my cell number 310-874-8956 for address. Easy access off 295 and highway 38.

P.S I do have heat in the garage.

Thanks.
Randy

[Northeast Rider]

Randy

if I bring a new set of tires can we mount and balance at your place?

thanks

Brian

[SteveST1300]

Brian I don't want to speak for Randy but he does have all the equipment, he has done tires for me so I am sure it will be OK. And Randy I will also volunteer to cook! :03biker:

[Northeast Rider]

Steve, will you have time to cook and mount and balance my tires?:D

Do "we" and I'm not speaking french, have the spline grease?
I will have a new set of Avon Storms, you reported good luck with them....

[st1300r]

I'm sure I have the moly paste lying about somewhere

[Northeast Rider]

I'm sure I have the moly paste lying about somewhere

God Bless you.

[Del]

Randy

if I bring a new set of tires can we mount and balance at your place?

thanks

Brian

I have two new Z6's that that I humping to the Taj Mahal of garages.

..and the proper spline grease too!

[rulbe]

Hey Guys

No problem on the tire mount and balance, I even have some new rim adapters ordered that will help with the install!
I have a couple tubes of Honda Moly 60 spline paste!

We can take shifts on tires and cooking! :)

Talk to you soon
Randy

[jmcglash]

Randy,

Ok great Sat April 26 is good for me. Can we plan for 9 AM?

Dennis, would you like to ride down together since I'm along the way? Looks like its going to be 287 south to Turnpike south about 90 min. Since I'm right off 287 could you meet me at about 7:30?

Mitch

It would be great to hook up with the ST folks again.

Randy I'll PM you for the address if it is ok with you.
Mitch I'm in Bound Brook and chance of riding down with you and Dennis?

Any requests for tools I should bring? Meter, butane soldering iron, shrink tube, wire, I see you have Molly.

Jim

[TRNewtown]

Randy,

I am in for April 26. I am planning to do a bit of maintenance before that (new battery, change oil and oil filter, change final drive oil, new spark plugs). I hope to do some or all of the following at the Tech Day:
- Change Air Filter (I need some moral support in removing the gas tank)
- Install Dash Shelf (I might need some assistance in removing some of the front tupperware)
- Change Brake and Clutch Fluids (I have never done this before, but would like to learn)

Tom

[mitchnj]

It would be great to hook up with the ST folks again.

Randy I'll PM you for the address if it is ok with you.
Mitch I'm in Bound Brook and chance of riding down with you and Dennis?

Any requests for tools I should bring? Meter, butane soldering iron, shrink tube, wire, I see you have Molly.

Jim

Hi Jim,
Lets make plans to meet. If Dennis is going he could meet me first and then we could meet you off 287. What exit is best? 10 maybe? I guess 8 or 8:30

Mitch

[rulbe]

Hey guys!

Looks like it will be a good turn out.

Here is the list I have so far:

Mitchnj
Northeast Rider
TRNewtown
MikesBlackbird
SteveST1300
rosast1300
st1300r
DWJ Honda
Del
bunson
STBNE
Jmcglash

Some of you have pm me for an address, send me a pm and I will give you my cell to call for the exact address. Aslo getting request for bringing food ( amazing how food always brings the best out with riders!) Let me know if you want to bring something and I will compile a list.

Look forward to meeting all of you! :)

Randy

[Del]

Dogs, burgers, sausage? I'm taking requests.

[jmcglash]

Dogs, burgers, sausage? I'm taking requests.

Sausage :) I love Sausage on the grill.

This is going to be a great day!

Thanks
Jim

P.S. I still have a few strips of aluminum if you want to move your windscreen up and out I'll just bring a few various set with me. (304 Stainless is a pain to work with)

[jmcglash]

Hi Jim,
Lets make plans to meet. If Dennis is going he could meet me first and then we could meet you off 287. What exit is best? 10 maybe? I guess 8 or 8:30

Mitch

Mitch,

It took me a few seconds to realize exit 10 is Easton Ave :(

The is a gas station (Amoco ?) right there by the exit on the right we could meet or a Dunkin Donuts in the strip at the first light also on the right.
8 sounds like a good meet time as it should be about a hour to Randy's from there?

I think Dennis already has my number but I will PM both of you later when I get home just to be sure.

Time to get to toy out and the road and ready to play :D

Jim

[MikesBlackbird]

Randy,

I am in for April 26. I am planning to do a bit of maintenance before that (new battery, change oil and oil filter, change final drive oil, new spark plugs). I hope to do some or all of the following at the Tech Day:
- Change Air Filter (I need some moral support in removing the gas tank)
- Install Dash Shelf (I might need some assistance in removing some of the front tupperware)
- Change Brake and Clutch Fluids (I have never done this before, but would like to learn)

Tom

Hi Tom,

I'm up in Jamison and am planning to attend. Are you interested in meeting up and riding down together? I would also like to change out the brake and clutch fluid. Let me know if you are interested and maybe we can set something up.

[TRNewtown]

Mike - Sounds good to me. I live near Tyler State Park in the Newtown Crossing development. Maybe a week ahead of time we can agree on a time and a place to meet.

[rulbe]

Tom and Mike

I have a vaccula bleeder so all you will need is to bring brake fluid.

Look forward to meeting you all!

Randy

[MikesBlackbird]

Tom and Mike

I have a vaccula bleeder so all you will need is to bring brake fluid.

Look forward to meeting you all!

Randy

Thanks Randy.

[Fster]

I have a new 2006 with only 600 miles on so I would use this day to just rack some miles on and maybe learn something. Maybe I could meet up with some northern jersey guys on their way down, I'll have to keep this day in mind.

[mitchnj]

I have a new 2006 with only 600 miles on so I would use this day to just rack some miles on and maybe learn something. Maybe I could meet up with some northern jersey guys on their way down, I'll have to keep this day in mind.

We might have a couple of guys meeting near routes 78 and 287. You're welcome to join us. I think Pottsville is near 78. Will confirm plans a few days prior.

Mitch

[rulbe]

Fster

Look forward to you visiting! Beware we might ask you to help!

Here is the list I have so far:

Mitchnj
Northeast Rider
TRNewtown
MikesBlackbird
SteveST1300
rosast1300
st1300r
DWJ Honda
Del
bunson
STBNE
Jmcglash
Fster


See you all soon!
Randy

[Freddy62]

Hi Guys,
I ordered a zumo550 that has not arrived and would like some ideas on how to install. I need a power outlet to charge my phone and for the gps. I would appreciate any input. I would buy the accessories and if possible with some help would like to install it. I am from Brockton (Boston) and would like the opportunity to meet some STOC members. I wish I had more spare time to do more ridding, but as you all know for some of use that is not possible. If their is a link that would help me, please let me know. Thanks,

[jimbob]

Wouldn't mind meeting others from the forum and learning a thing or three. I'm just over in Mt. Laurel. Set a date or pm.

[jimbob]

I'ld be interested also. I'm over in Mt. Laurel

[rulbe]

Freddy62
Most guys put an aux fuse block on then hook their assessories to. Some use the Blue Sea or Centech fuse blocks. You can check Eastern Beaver for wiring kits and fuse blocks. Jim is a good guy to deal with and has good products.

Jimbob
You are welcome to come over the date is April 26 starting at 9 am. Send me a pm and I will give you address.

Thanks.
Randy

[Freddy62]

Thanks for the information. I will follow-up.

[Mr Bill]

Randy,

I do not need anything done that I know of, but this looks like a great way to meet ST owners in this area. I have a little mechanical skill, some tools, and a would love to meet and learn. Got room for one more on the 26th? If so, let me know how to make contact. (PM?)

[rulbe]

The list continues to grow! Will be a great day

Mitchnj
Northeast Rider
TRNewtown
MikesBlackbird
SteveST1300
rosast1300
st1300r
DWJ Honda
Del
bunson
STBNE
Jmcglash
Fster
Jimbob
Mr Bill

Look forward to meeting everyone!
PM me for food request and I will post a list.

Thanks.
Randy

[kinzer1]

I think I can make it April 26.

[STBNE]

The list continues to grow! Will be a great day

Mitchnj
Northeast Rider
TRNewtown
MikesBlackbird
SteveST1300
rosast1300
st1300r
DWJ Honda
Del
bunson
STBNE
Jmcglash
Fster
Jimbob
Mr Bill

Look forward to meeting everyone!
PM me for food request and I will post a list.

Thanks.
Randy

Randy unfortunately I cannot make this event,much to my dismay.I work Sat's and am usually on the road driving a truck.If you were to switch this to a Sunday then I'd be there in a flash!However I realize the inconvienience this would cause so.....maybe next time...:(

[rulbe]

Mitchnj
Northeast Rider
TRNewtown
MikesBlackbird
SteveST1300
rosast1300
st1300r
DWJ Honda
Del
bunson
STBNE
Jmcglash
Fster
Jimbob
Mr Bill
Kinzer1

Mike added you to the list.
Ben unfortunately Sunday is left for me to ride!
Who knows if this one is a success maybe we can work in a Sunday.
Looking forward to meeting everyone.
Randy

[Fster]

I'm out, all ready had plans I forgot about, well maybe next time.

[SteveST1300]

I may have to think about tires after Moonshine, I think about 2K more should kill my Storms. I may order a set now just in case.:03biker:

[SteveST1300]

Tyres on order should be here in 2-3 buisiness days!:03biker:

[Northeast Rider]

Steve what you get this time......

[poochar]

Hey Randy......
Think I will show up !!!
Across the River in Chalfont, PA

Thanks,
Eric

[pretbek]

Dagnabbit!!
I just discovered this thread. I am really really close (West Chester PA, 15 miles West of Philly), but I can't attend, because I have 7 family members coming over to visit from the Netherlands just that week.

It would have been great fun to see half of you again, meet the other half for the first time, and learn how to mount and balance my tires myself.
Oh well, I'll catch the next one, I guess.

Have fun and eat well!

[Del]

Dagnabbit!!
I just discovered this thread. I am really really close (West Chester PA, 15 miles West of Philly), but I can't attend, because I have 7 family members coming over to visit from the Netherlands just that week.

It would have been great fun to see half of you again, meet the other half for the first time, and learn how to mount and balance my tires myself.
Oh well, I'll catch the next one, I guess.

Have fun and eat well!

Buy a few sets of tire irons and bring the family with you, they will always remember their visit.

[rulbe]

We can always use an extra hand changing tires!

Steve are you going back with Storms?

Thanks for keeping the post going and I am sure we will have a great day!

Randy

[MikesBlackbird]

I'm thinking about the Stebel horn upgrade. Is that something I can tackle while I'm there on top of a clutch and brake fluid change? Just curious. Don't want to jump in on a project like that and not finish.

[rulbe]

Mike
The Stebel horn is an easy install, Steve and I were talking tonight about it. You might want to search other posts about using an upgraded relay. I purchased mine from Eastern Beaver, Jim is very quick on sending out and has quality components.

Randy

[MikesBlackbird]

Thanks Randy. I've read the posts and I'll come prepared with the horn, relay, 12 ga wire, fuse, etc and put it on the list. See you then.

By the way, are you planning to post a list of some sort of what we should bring in the way of food, drinks, etc?

['04 ST1300A in NJ]

Just saw this topic while looking at my private message folder. Sounds good to me. I'll email for address. Saw that jmcglash is also attending. We've emailed before but have never met. Will email another STer from Bound Brook, NJ to see if he's interested also.

Never knew anything about tech days before.

Roger

[rulbe]

Roger
I was mounting a tire for Steve (SteveST1300) and talked about putting together a meet and greet. Thought a combination tech day and greet would be a way to return all the good information posted on this board. I was always told that with two minds great things could be accomplished! Just think what we can do with a group of ST owners! Solve world peace, cure hunger, well maybe not that stuff but we will have lunch!

Randy

[SteveST1300]

I just got a PM from George who will be doing his brakes at Tech STOC NJ. He is sending them to my house. This is going to be a great event I am looking forward to it. :03biker:

[mitchnj]

Mike
The Stebel horn is an easy install, Steve and I were talking tonight about it. You might want to search other posts about using an upgraded relay. I purchased mine from Eastern Beaver, Jim is very quick on sending out and has quality components.

Randy

Hi Randy,
I just got my wiring kit from Eastern Beaver. Look forward to Tech day and meeting everyone!

Mitch

[bunson]

Unfortunately I won't be able to make this. I was just reminded that I have to attend a wedding that day.

[George]

Looking forward to seeing youse guys next weekend. I'll be leaving my sister's in southern IN on Wednesday, so no problem getting there on time.

I'm gonna wanna do a front tire change plus bearings and front brake pads. I'll be available to help with anything else, too. Mine should all go pretty quick.

Steve, I sourced the brake pads locally so don't expect a package. Thanks, tho.

How do I find the garage-ma-hal??

[rulbe]

George

PM sent.

We will have a great day! I also have family in Southern IN.
Ride safe!
Randy

[Del]

Looking forward to seeing youse guys next weekend. I'll be leaving my sister's in southern IN on Wednesday, so no problem getting there on time.

I'm gonna wanna do a front tire change plus bearings and front brake pads. I'll be available to help with anything else, too. Mine should all go pretty quick.

Steve, I sourced the brake pads locally so don't expect a package. Thanks, tho.

How do I find the garage-ma-hal??


I am planning on front and rear tires and brakes should I be concerned with bearings too? My 2004 just hit 40K mi.

Randy sending PM

[rulbe]

Michael

They should be ok but I may pick up a set to have on hand just in case. Talk to you soon!
Randy

[rulbe]

Hello All! I have been asked about bringing food and soda. Michael (Del) is bringing the meat and fixings. If you want to post what you would like to bring that would be fine. It is not necessary to bring anything but yourself. Just let me know and I will post next to each person and you can decide what you would like. Remember we must work after lunch so think lite! :)
If you know anyone else that may want to attend just let me know. My wife said if you would like to bring spouse or significant other they are welcome it is also a meet and greet for the group!
PM me if you need directions. Look forward to meeting everyone and having a great day!
Here is the list so far:
Mitchnj
Northeast Rider
TRNewtown
MikesBlackbird
SteveST1300
rosast1300
st1300r
DWJ Honda
Del
Jmcglash
Jimbob
Mr Bill
Kinzer1
Poochar
04 ST1300A in NJ
George

Thanks.
Randy

[Northeast Rider]

http://www.st-owners.com/forums/attachment.php?attachmentid=29960&d=1208711717

Ran out of rubber, I don't think I have enough left to make the 240 mile trip.

[rulbe]

Northeast Rider

Looks like you got the most out of that tire! I understand about the 240 mile trip. If you get it changed out before the weekend come on down.

Randy

[George]

D-oh! <forehead slap>

Posted to the VA techSTOC earlier, must'a been the late night.

Anyhoo, I'm gonna have to withdraw. Death in the family necessitates a trip to Tennessee later this week. I'm gonna do my needed maintenance chores today and head south-east tomorrow or Wednesday. I'll still be headed north-east but prolly next week sometime.

Hope youse guys have a successful greasy day.

[rulbe]

George

Sorry about the death in the family! Hope all is well!
If in the neighborhood you are welcome to stop by if nothing else but to say hello, bite to eat and discuss southern IN!
Safe Journey
Randy

Randy

[MikesBlackbird]

Hi Randy,

Assuming the weather cooperates I'll be there. Please PM me your address. Thanks and I hope to see you on Saturday.

[George]

Okay, re-re-change of plans. As we were planning the trip to TN, oldest sister called to say showing was last night, funeral this morning. So, it's all over. I'll stop there on the way home next month to pay respects and offer sympathy.

And, I'll be in Joisey Saturday!

Did the front tire yesterday. Had to carry the wheel to a commercial tire dealer for air as we couldn't get enuff volume to spread the beads here at home. Also, couldn't remove the brake pad pins so no fresh brakes yet. No real problem as grooves are still showing on all 4 pads.

Took a short test ride after reassemby, sans helmet, and heard a bad noise. Back home found the _rear_ brake pads metal-on-metal. Put in a pair of the available front pads so that's good now.

I'll try to source another pair of front pads before I get there Saturday and hope to show youse guys how to remove a reluctant pad pin. Don't wanna try it here as my brother-in-law is seriously lacking in tools. But, BOY, can he cook! :D

[Mellow]

Ride safe George.

[SteveST1300]

Glad you will make it George. Looking forward to seeing everyone. I see some familiar names on the list and some new ones. I t will be fun. Brian hope you can still make it.:03biker:

[rulbe]

George
I have a set of EBC pads if you need them. I don't think I can get a set of OEM ordered in time but will check.
Glad you can make it! I have a large assortment of tools, let me know if you think you will need some heat and I will see about borrowing a torch set.

Randy

[jmcglash]

SNIP...
I have a large assortment of tools, let me know if you think you will need some heat and I will see about borrowing a torch set.


Randy,

I have a portable MAPP torch with a three foot hose I can bring if you just need heat. If you need to cut well... that rig is too big for the bike :-) but I have a old Sears Oxy Mapp torch I was given. I'll see if I can find tanks for it before Sat.

Jim

[rulbe]

Jim

I have a small bottle of MAP gas, I will check my source tomorrow and let you know if we need yours.
Thanks Jim
Randy

[George]

I thnk I'm all good. Will be there to help out others as needed. See youse guys Saturday.

Randy, I'll call when I get close.

[rulbe]

George

Being from the mid west haven't quite picked up the yooose guy thing only been here for three years but am slowly learning the language of NJ.

See you Saturday!
Randy

[Flemming Rose]

Hi Rulbe i just sent you a PM to get info on your Tech day and found this thread afterwards. Looks like you'll have a full garage and I have to work a bit in Parsippany. Sorry I'll miss it. I was gonna bring some good food too. Maybe you'll try this agian sometime?

[Billb_447]

Hi Randy, I just saw your post about NJ Tech Day...sounds like a great idea.
Unfortunately, I have what I've just been told is a "firm committment" of a domestic nature on the 26th.
I would however be interested in meeting other ST owners at some future date. Moreover, I have a looming tire replacement project in the wings. I'd appreciate it if you'd add my screen name to the list for any future get togethers.
Thanks, again.
Bill B.

[TRICKYRIC5474]

I just discovered the NJ Tech Day post today. I would love to be there but am already committed. I've pretty much done all the farkling to my 2007 already (except for Staintunes, which should be delivered and installed within a week), but I'd love to meet up with other ST-Owners and maybe do a throttle body sync. just to make sure my ST13 is as it should be.
Please keep me in the loop and I'll try to attend future NJ events, allowing for my two daughters' hectic softball team (5) schedules.

Enjoy the day guys, wish I could join you.

[2004ej]

Just found this thread, and as I see with a couple of other people I have to work. I would like to be put on a list, (if one is being kept) of future Jerzee meets. I recently purchased a ST 1100 and would like to meet some other ST owners here in Jerzee. Hope all goes well Saturday and everyone arrives safe....


Hope someone takes and posts some pictures.

[rulbe]

Billb 447
TrickyRic 5474
2004ej

I understand about having plans. I will gather input Saturday about another Tech day. If nothing else we can always meet for a meet and greet for lunch! A few of us rode 700 miles for ice cream and celebrate Mellow's B - day. I will try to put a list of those that have replied to keep everyone in the loop about any upcoming NJ events. You can always PM me if you need any tires mounted, I have a No Mar tire changer and balancer.

I will take some photos and post them this weekend! Thanks for the response guys!

Randy

[mitchnj]

If anyone wants to meet up at the intersection of routes 287 and 78 let me know. There's a MCDonalds and Starbucks off exit 22 (287) Plan around 8:30

Mitch

[jmcglash]

There is an EXXON just off 287 exit 10 Regular 3.46 Perm 3.66 and a Dunkin Donuts right next door in the little stripmall. (You can see it as you pull into EXXON)

If anyone from of RT22 wants to meet up Mitch and I should be at the Dunkin Donuts bellow at about 8am.

Jim

['04 ST1300A in NJ]

JIM

I'll meet you at the DD at ~8 am in the rain!!

My cell # is 908 764-8344 in case you have to call me in the morning.

Roger

[Del]

Randy I will be going to the office for 8 AM and should be out of there by 9, have no fear the meat, bread & condiments will be securely ensconsed in my topbox. I expect to arrive by 10:30 or so, will call you for a head count before I leave the office.
Michael

[rulbe]

Michael

Make sure the box it on tight!

See you tomorrow.
Randy

[rulbe]

Hello All!

Looking forward to meeting everyone tomorrow. George made here a couple hours ago safe and sound. Wife put him up in the guest room.

Ride Safe Everyone and see you in the morning!
Call me if you need final directions. There is a 20 foot flag pole in front yard.

Randy

[Northeast Rider]

Will not make it. :(
Hope you all have safe travels, and a good time today.

$250!!
to mount and balance tires, bike is in the shop. I did'nt leave enough rubber on to get to you.

Think of how much good your all doing by getting together, 250 - thats alot of steak and beer for the grill.

[rulbe]

Just wanted to say thanks for the great turnout for my first NJ Tech day! I think I counted 14 that showed up. It was great to meet everyone, put a face with a name. I will try to post some photos tomorrow, I know Steve took photos as well, we tried to document all the farkles done or at least those that were working! Hope everyone made it home fine and enjoyed themselves.

Until our next meet and greet ride safe!

Randy

[STBNE]

Just wanted to say thanks for the great turnout for my first NJ Tech day! I think I counted 14 that showed up. It was great to meet everyone, put a face with a name. I will try to post some photos tomorrow, I know Steve took photos as well, we tried to document all the farkles done or at least those that were working! Hope everyone made it home fine and enjoyed themselves.

Until our next meet and greet ride safe!

Randy
Hey Randy... although I had to work today I kept thinking abt this NJ tech day and hope to get in on the next meet ,RTE or what have you...If anything could be planned on a Sunday then I'd be good or advanced notice of a Sat event and I might be able to swing it.Glad to hear this was a successful day for you all.Look forward to the pics.;)

[mitchnj]

Just wanted to say thanks for the great turnout for my first NJ Tech day! I think I counted 14 that showed up. It was great to meet everyone, put a face with a name. I will try to post some photos tomorrow, I know Steve took photos as well, we tried to document all the farkles done or at least those that were working! Hope everyone made it home fine and enjoyed themselves.

Until our next meet and greet ride safe!

Randy


The day was great! It was fun meeting everyone. I really appreciate all the help and education from Steve and yourself and everyone else!

The light bar turn signals look awesome at night! Now I know how to remove tuperware and get it back on correctly.

Many Thanks!
Mitch

[MikesBlackbird]

Just wanted to say thanks for the great turnout for my first NJ Tech day! I think I counted 14 that showed up. It was great to meet everyone, put a face with a name. I will try to post some photos tomorrow, I know Steve took photos as well, we tried to document all the farkles done or at least those that were working! Hope everyone made it home fine and enjoyed themselves.

Until our next meet and greet ride safe!

Randy

Randy,

Once again thanks to you and your wife for having us; you both are very gracious to allow us to spend a day at your place and use your tools and eat your food. As a new rider, I learned a lot about pulling the bike apart. Thanks especially to Steve and Michael for the the help with the Stebel (played with it a few times on the way home) and also the cooking (Steve could have a second career started as a grill man!).

Be safe and hope to see you all again soon.

[Flemming Rose]

Randy and your better half,

Thanks for your hospitality. It's always great to meet new people who love riding and fellowship. Thanks for lunch.

[rulbe]

Thanks Guys!

Sorry I didn't get to spend a lot time with you all, George and I were a little tied up with his rear tire on his bike.

It was great to meet and see all of you taking time to keep your bikes in top condition. Just being able to provide a place for all of you to work on the bikes was my pleasure.
I want to thank Michael for bringing the meat and all of you that brought something for us to enjoy after all our labors! Thanks Steve for cooking! Also Thank you Roger for bringing your wife's brownies, I could tell by not having any left to eat today that no one really liked them! Just kidding they were great!

I will look at my schedule and see when we can plan another NJ Tech Day.

Here are a few photos that I took. I know Mellow wanted to post photos of farkles, but just seeing all you guys so labor intense watching others was great or was that just educating those as they worked on their bikes?
Once again thank you for attending it my wife and I pleasure to host the event!

Enjoy
Randy

[rulbe]

Sorry guys I forgot to add photos! Must be wore out from all the work yesterday.

Enjoy
Randy

['04 ST1300A in NJ]

Just wanted to say thanks for the great turnout for my first NJ Tech day! I think I counted 14 that showed up. It was great to meet everyone, put a face with a name. I will try to post some photos tomorrow, I know Steve took photos as well, we tried to document all the farkles done or at least those that were working! Hope everyone made it home fine and enjoyed themselves.

Until our next meet and greet ride safe!

Randy

Randy---thanks very much for hosting this event. It was a first for me. Great to meet you, your wife, Kathleen (sp?), and son, River, and all those other STers. My aim was to learn from the work performed on others' bikes and I did indeed.

I congratulate Mitch for his farkles undertaking. He did a great job (despite him allegedly being a non-hands on person!!??) with assistance from many. I'll be adding the same items soon.

Great Amish bread, sausage burgers, hots dogs, etc. I told my wife that her brownies were a hit.

PS--I found my spare key when I got home, just where I thought: In my stashed rain gear pocket in the top box.

Roger
><>

[rulbe]

Roger

Glad to here you enjoyed the event! Let me know if you need any assistance on any additions to your bike.


Randy

[mitchnj]

I congratulate Mitch for his farkles undertaking. He did a great job (despite him allegedly being a non-hands on person!!??) with assistance from many. I'll be adding the same items soon.
><>

Thanks Roger! I was laughing when I read that because I really am a non hands on person! But with everyones help I was able to succeed! The hardest part was just staying relaxed and focused, just like riding!!!:D

BTW I couldn't resist and tested the Stebel a few times at intersections when maybe it really wasn't necessary. Got a few mean looks that had me laughing! Best $50 I ever spent!

Mitch

[SteveST1300]

Randy the event was great! I think we got a lot of tire kicking done outside the garage and a fair amount of work done inside! I am attaching some of the pictures I took.

[SteveST1300]

I will post some more later my pictures will have to be resized they are a bit over the 488 that is allowed.

[SteveST1300]

Ok here are a few more that meet the size requirements.:03biker:

[st1300r]

Randy and familiy,
Thanks again for having us. Who knows, next time, rather than randomly snipping wires in Michaels ST I might even work on my own in the garagemahal. LOL. BTW sweet collection of scoots you got there.

[Del]

My turn to chime in. First of all to the owners of the Garagemahal many thanks for your welcoming hospitality, Kathleen and Randy you both are great.

Next, my day would not of been possible without all the technical expertise that graciously guided me, sometimes assisted me and at other times flat out did the work for me.

Randy you are high on that list, many thanks again for tools and tech help.

George pleasure to meet you, work with you and watch you work on my ST. No doubt George you are now just as comfortable working on a 1300 as an 1100.

Carl I had complete faith watching you and the razor blade attack my my wiring. If you can't trust an Electrical Engineer with your wires who can you trust?

Steve you too (and you are a good cooker), Michael and all the rest of the great bunch of us who gathered in far away Lumberton.

Finally for all of you who asked and especially for George who was slightly chagrined to see me (figuratively) swapping brakes and tires that he thought had a few more miles left on them. This is what I got out of each:

Tires
Front Z6 15,540 miles
Rear Z6 11,508 miles

Brakes
Front Ferrodo 15,540 miles
Rear Ferrodo 19,569 miles

Looking forward to seeing you all again soon.

[Freddy62]

Randy,
It seems like everyone had a great time and learned a few things. It was a great day. I made the trip from Brockton (Boston, MA) to Perth Amboy, NJ But was not able to make it to your place due to the lack of time. I really which I had gone. Thanks for taking the time to share your place and knowledge with others. I and others appreciate that. You are a great person GOD bless you, your family and friends.
P.D: Thanks for the phone call.

[rulbe]

Thanks Carl and Michael!

Randy

[st1300r]

So how many miles do you figure to get on the storms? :)



Finally for all of you who asked and especially for George who was slightly chagrined to see me (figuratively) swapping brakes and tires that he thought had a few more miles left on them. This is what I got out of each:

Tires
Front Z6 15,540 miles
Rear Z6 11,508 miles

Brakes
Front Ferrodo 15,540 miles
Rear Ferrodo 19,569 miles

Looking forward to seeing you all again soon.

[SteveST1300]

Carl I dont think he put Storms on. I have Storms on mine I got a bit over 8K on the rear and it was done the front may have gone another 1K.:03biker:

[st1300r]

Yeah I know, Randy was tweakin him when they started the change out like the wrong tires were there. LOL.

[Zinfandel]

Hello Everyone,

I'm a new guy on the forum, own a '91 ST1100, 25k miles.
Okay stop laughing... so I don't get out much, but the bike looks great!

I think it might be time to synch the carbs and other assorted adjustments.
I'm handy, but I don't have the patients for motorcycle repair. The tech day looks like fun, and without even knowing the guy, just based on what I see here on the forum, I have to commend Randy for being such a decent guy!

Sorry I missed it.

My STeed and I live in Oradell NJ, for those of you who don't know where that is, think Paramus or Bergen County.

I used to service the bike at Amol in Dumont. If you didn't own a bike and service it there, you would never get to see this place. Nice people, competent mechanics, reasonable prices, but in the middle fo nowhere. Despite all those good attributes, they went out of business.

I don't like highway dealerships; they see everyone as a thousand dollar bill with legs. Sometimes they just hack off an arm and a leg and you get to keep the change.

Can any of you suggest a more personable place where I can service the old geezer? I gotta do that before I can ride for real. eh?

[STBNE]

Hello Everyone,

I'm a new guy on the forum, own a '91 ST1100, 25k miles.
Okay stop laughing... so I don't get out much, but the bike looks great!

I think it might be time to synch the carbs and other assorted adjustments.
I'm handy, but I don't have the patients for motorcycle repair. The tech day looks like fun, and without even knowing the guy, just based on what I see here on the forum, I have to commend Randy for being such a decent guy!

Sorry I missed it.

My STeed and I live in Oradell NJ, for those of you who don't know where that is, think Paramus or Bergen County.

I used to service the bike at Amol in Dumont. If you didn't own a bike and service it there, you would never get to see this place. Nice people, competent mechanics, reasonable prices, but in the middle fo nowhere. Despite all those good attributes, they went out of business.

I don't like highway dealerships; they see everyone as a thousand dollar bill with legs. Sometimes they just hack off an arm and a leg and you get to keep the change.

Can any of you suggest a more personable place where I can service the old geezer? I gotta do that before I can ride for real. eh?

A '91 with 25k miles? wow not laughing at all...thats just abt unheard of though...Wecome to the forum...I am in central NJ...i too missed the NJ Tech Day so I'll want to make the next one if there is enough interest for it...You gotta watch those STealerships...LOL...your analysis is essentially correct.Not too sure of places in your area that would be good for doing service to your ST...As for riding for real it is what it is and nobody will mock you for it ....ok wimp get out and svc that bike and ride it like a real man...LOL...J/K OFC;) :biker:

[Zinfandel]

Guys,

I've never been to a tech day, I'm not sure what to make of it.
Randy is nice enough to host, and that sounds mighty generous.

How do we compsensate his generosity?
What happens when you take apart your bike and you don't have what you need to put it back together? What happens if parts aren't available?

I described the symptoms of my bike to the local STealer and he said it sounds like my carbs need to be cleaned, $800- for a cleaning. Taking apart the carbs sounds like a little more than I'm willing to deal with on my own and alot more than I'm willing to pay for. Heck, I only paid $500- for my '78 CB750K

If not Randy, then someone else who's been to tech days, give me a splanation on how this goes down.

Hey BNE! I want to see you riding down to Lumberton with two tires!! :)

[STBNE]

Hey BNE! I want to see you riding down to Lumberton with two tires!! :)

Sure that'll be no sweat :eek: LOL...whats more is the gallon of oil and filter I'm bringing plus my shop manual and any food yet to be determined or beverage of choice...been a while since theres been any life on this thread but we've got 9 more days:D Oh...as to your questions abt things you would need ...its a good idea to plan on getting what you need before coming to a tech event...that way it'll actually get done..with any luck..LOL

[rulbe]

Elliot
Not sure the problem you are having but we can take a look at it. What is the symptom?
As far as what to bring. I will pick up some burgers , you might bring some chips and soda.
I am on my way back from the Honda Hoot and will arrive home Saturday afternoon late. I posted on the TECH Events Tab on the Home page. I have a few people post on that but not much. I know there is a lot going on before the 4th.
All those that come are welcome!
Talk to you guys soon!
Randy

[rulbe]

Just a friendly reminder to all those that are planning on attending the NJ Tech Day on Saturday June 28. Can you let me know so I can have a head count to plan enough for food.

Look forward to seeing and meeting all of you!

Randy

[STBNE]

I'm In...see ya Sat!:bannana :hotpepper

[rulbe]

Ben

I have received a couple calls looks like about 4 or 5 people. There may be a few guys drop by to visit or may be the food!

See you Saturday.
Randy

[STBNE]

Cool Randy....I was just down at Mt Holly Yamaha/Honda on rte 38 today so I was close by...Lookin' forward to Sat.:D :biker:

[bunson]

I've been out of town w/o internet access for the past week. I expect to be there.

[rulbe]

bunson

Sounds great! See you on Saturday.

Randy

[goormove]

I know it's late in the game - but I am certainly coming over around lunchtime - I'll bring some stuff with me and I do really want to tear into anything today - just more looking and listening.

Thanks - see you soon!

[rulbe]

Hope everyone had a safe ride home!
It was nice to meet new members and see returning faces!
Hope you enjoyed lunch and good conversation!

Talk to you all later!
Randy

[STBNE]

Randy...my apologies for not posting sooner...got busy around the house and then pooped out and took a nap...Anyways......I got home with no problems and actually it felt good to have a headwind to cool me down on the way home.The tires feel fine and my front end shake on deaccel is GONE! Dont let anyone tell you that a little front end shake on de-accel is normal..its not!My front tire was badly cupped contributing to the shake...
A great big Thankyou for your technical expertise,friendship and for providing a great home facility...just awsome!It was great to meet you and all the other fellow ST-ers whom I met today.I am now ready to tackle the twisties of PA coming up next month at PASTOC '08:D :bow1: :bow1: :bow1: :biker:

[st1300r]

Sorry I missed it.
Did manage to drive past on my way to get rained on :)
See you next time. New shoes are on order. Going with the PR2s.

[goormove]

Sorry for the delay in writing as well - I got all tied up with work stuff. Thanks to Randy for all the great help and for sharing his home and garage with us. I had a nice ride home (25 mins) and hit no rain which was fabulous. The rear oil change has made a big difference in smoothness - thanks very much for that.

I also put the staintunes back on and am enjoying the better performance and mileage. The end caps should be in in the next few days. Next up for me, checking out the rear caliper and changing the front brake pads. In Aug I'll be looking for some help with forks and rear suspension - I'll be calling on Randy for more help I am sure.

Great to meet everyone - it's nice to hang with other riders - and the shop was amazing...made me want to be a Honda tech! See you all soon.

J

**btw - Ben - Nice ride man!

[George]

Guys,

<snip>
Hey BNE! I want to see you riding down to Lumberton with two tires!! :)

Elliott, hauling tars is no big deal. I showed up at NJTechSTOC back in April after riding over a thousand miles with them from Chicago. Loaded the used tires when I left and hauled'em home, another 10,000 miles.

Much thanks to Randy for putting these on. It's a great venue for youse guys.

[rulbe]

George

Thanks! It was a great opportunity to meet someone from the other side of the country!
If you ever get back to this side remember you always have a place to visit.

Keep in touch.
Randy

[STBNE]

http://i242.photobucket.com/albums/ff163/madmax-im/017-1.jpgSorry for the delay in writing as well - I got all tied up with work stuff. Thanks to Randy for all the great help and for sharing his home and garage with us. I had a nice ride home (25 mins) and hit no rain which was fabulous. The rear oil change has made a big difference in smoothness - thanks very much for that.

I also put the staintunes back on and am enjoying the better performance and mileage. The end caps should be in in the next few days. Next up for me, checking out the rear caliper and changing the front brake pads. In Aug I'll be looking for some help with forks and rear suspension - I'll be calling on Randy for more help I am sure.

Great to meet everyone - it's nice to hang with other riders - and the shop was amazing...made me want to be a Honda tech! See you all soon.

J

**btw - Ben - Nice ride man!
Hey Jayce...I thought I had double vision there for a while...LOL...of all the Reds' for the ST1100...Pure Pearl Red that was issued to the '95,'96 and '97 model years was/is the best looking Red of them all..IMO.Its the only time Honda kept the color the same for more than 2 model yrs consecutively(on the ST).Must have been a reason for that..like it was the most popular Red...its funny 'cuz when I used to see the Red STs' before I had mine..I didnt like it...now I think its the best color out there...Hope you enjoy yours for many yrs to come...
George...I missed you during the 1st NJTech Day but if you are heading this way again you're more than welcome to stay the night or 2 at my home if you should ever need a place...and i have a garage too.This invitation is open to all fellow ST-ers as well.:D

[STBNE]

Elliott, hauling tars is no big deal. I showed up at NJTechSTOC back in April after riding over a thousand miles with them from Chicago. Loaded the used tires when I left and hauled'em home, another 10,000 miles.

Much thanks to Randy for putting these on. It's a great venue for youse guys.

Very true...I only had to ride 26 miles to Randy's place...I have a big elastic bungee net.I stretched it over 2 stacked tires sitting on the rear portion of the seat and on the rear of the bike...and they were snug as could be...only time they moved is when i hit a bump in the road...and they slid into my lower back...a little bit...didnt get a pic of it but its really no biggie:D;)

[2004ej]

Sorry I missed it or you would have seen another Red 1100! I forgot all about it, I was busy with so much stuff.... Man I am kicking myself, I need to go and learn all about the ST's from all of you smart guys....

I have to make the next one!!!! No I WILL MAKE THE NEXT ONE!!!!

glad everyone had a good time..... see you next time.

[rulbe]

Glad everyone enjoyed themselves may have to do a roll call for more ST1300 seems the ST1100 may be taking over!
Do to my busy summer schedule it may not be till September. I will keep an eye on this thread and see what would be a good time for everyone. Off to Killeen TX Thursday back Saturday, Sunday to LA, back home Friday then to Bar Harbor Maine, then in one week to Denver for a week then to Detroit for a week, then back home for a few days!
Keep in touch and we will have another Tech Day or Cookout then ride day!
Ride safe Randy!

[gvolm]

Randy - I just joined the Forum and saw your posting. Let me know if you already met for the tech session. If not, and you're still looking for interest, count me in. I'd like to learn more about my '04 ST1300. I 've changed the brakes, oil, and filters but am looking to replace the brake fluids and rear drive fluid soon. Again, let me know if you have a pending date.

Thanks,
Gerry

[SteveST1300]

Randy let me know when you settle back home, sounds like a very busy summer, is it all work? I am headed for PAGCSTOC Thursday morning.

[Northeast Rider]

:bigpop:

[rulbe]

Gerry
Welcome to the forum! I will keep you posted on the next NJ Tech day. My job has me traveling for the next few weeks. Look forward to meeting you and anyone that wants to visit!

Steve
Unfortunately most of my travel is work, we are traveling to Bar Harbor on a camping trip, boy do I need it! I am not going to be able to make PA STOC due to late flight schedule. Have a great weekend I know the riding over there is great and hate to miss out on the ride! Ride safe! I will catch up soon!

Randy

[goormove]

I am certainly up for some more work on the red devil I own. I'd be up for carb sync, front brakes, and checking out the rear caliper that is still wonky. Randy, it would be great if you could host and help us less than tech savvy folks do some more work and learn a bit more. Let me know when you are thinking about it and I'll bring the food this time!

[2004ej]

waiting!

[2004ej]

OK its September???

I know I am kind of busy this month on weekends but hopefully I can work it in!

Now we just need a date!!!!:please1:

[goormove]

How about the 20th? I am nuts the other weekends in Sept!

[2004ej]

I ve got plans with my son, and I want to do as much this year with him as next year he is off to college,,, 21st I am off to Dover for the Campworld 400.

[rulbe]

Sorry guys for not posting! I have been busy with a couple projects from work, seems this work thing is getting in my way of having fun meeting ST riders! Just for a few moments a thought crossed my mind about not working but I guess without work I might not be to help out and meet a wonderful group of riders!

Ok How about September 27 or October 4 for the next NJ Tech DAY? Let me know what all your thoughts are and I will post a date!

Hope to hear from all and hope the summer rides have been enjoyable!

Randy

[Fster]

Wasn't there a Northern PA ride scheduled for the 4th of October, or was that the 11th?

[goormove]

oh well - maybe October 4?

[rulbe]

Fster

You are right about Northern PA run. I will leave that date open and we can see if that is a date that everyone can agree on. I will add another date as well.

So here goes for possible dates: September 27, October 4, October 18, October 25.

If you guys can post which dates work for you we will get things started!

Thanks.
Randy

[goormove]

I can't do the 27th but all the other dates work for me. Temple homecoming football! Thanks guys, I hope I can come. Lots to do...

[2004ej]

I will be out of the area on the weekend of the 27th, I am better with Oct.

but I am only one person, the needs of the many out weight the needs of the one.

[bikeopath]

I'd like to attend as well. Any of those dates work for me


Tony Pepenella
STOC 522
Staten Island, NY

[Fster]

I'd like to attend the NE PA run so any date other than the 4th is good for me.

[RobertCShay]

I'm interested in coming down too if it's not raining. Hopefully catch a convoy. Don't need any work done - bike has only 2,000miles - but would like to see what others are working on. Oct. 18th or 25th are fine.

[rulbe]

Thanks guys for the input!

I leaning more towards October 18 or 25. I think I going to try to make the NE PA ride as well.
I will continue to monitor as other input. Hope we can agree on a day to meet up, always fun to meet others even if we just talk about work already done!

Randy

[bikeopath]

9/27 works for me so far.

[TRNewtown]

I vote for October 18th as NJ Tech Day. I am thinking about heading up to the Oct 4th North Central PA RTE.

My tires are about worn out and would like to put on a new set sometime soon - hopefully at tech day.

Tom

[STBNE]

I vote for whatever day you choose other than Oct 4th...I too am looking to ride to Slate Run anybody wanna hook up?????:D:cool:

[2004ej]

Oct works for me, looks like everyone is going to PA on the 4th.

After the 4th works good for me...

[RobertCShay]

No message

[2004ej]

Where did everyone go??

Must be busy riding!

[rulbe]

Hey guys!
Been waiting to see when I would return back from LA. Looks like October 25 would be best for me. Let me know and I will post that date as the next NJ Tech Day.

Hope to hear from everyone soon!
Randy

[2004ej]

25th sounds good to me....

[rulbe]

I will wait till Friday then post it as official date October 25. I will also have the grill fired up and have hamburgers available. As the date gets near we can make arrangements on if anyone wants to bring anything.

Those that want to mount tires PM me if you want them shipped to my house. Also if we can get a idea of what everyone may be doing that would be great! I have brake bleeder, two M/C jacks and one M/C lift. Can do about anything just plan accordingly for finish by end of day or depending on who doesn't get finished they will have to fight for the guest room! :D

Randy

[SteveST1300]

25th would work for me. Randy I would like to do a brake fluid change.

[jmcglash]

If it is ok with you I have a FRP waiting to be installed. I think I'll order a spare of the hose junction just in case. I was sorry to have missed the last one but am looking forward fo seeing everyone again.

Jim

[rulbe]

Sounds good Jim and Steve. I will start a list of those coming.

Steve see you Saturday!

Randy

[George]

I won't be there this time. :D

Folks, Randy's garae is called The Garage Mahal for a good reason!

[rulbe]

George

Sorry to hear you won't make it this time! There is always a room available if in the area!

Thanks for the compliment on the garage! Sure nice to be able to share with other ST Owners that may need a little help!

It may be next spring before I can make it out your way.

Ride safe!
Randy

[rulbe]

Hello everyone!
I have decided to host another NJ Tech Day on October 25 starting at 9 am till all completed tasks are complete. I will also fire up the grill for burgers for lunch. If you just want to attend to meet fellow ST owners in the area fill free to come. PM me for my address and phone. Let me know if you have any specific needs for repairs. I have a No Mar Tire changer and balancer, brake bleeders, carb synch tools and most major tools. Depending on time frame of the day may offer up a surprise for those that attend!

Hope to hear from all of you! :D

Randy

[2004ej]

Just check'd with my boss, she sayz I can go!!! I ve been good and she is going to let me go. Not sure if I am going to do any work, I'll have to look at my bike. I was thinking of some new front brakes, they seem to have some play in them. Can't wait this should be fun...And I might learn something....

[rulbe]

2004ej

Great to hear you have been good! You are welcome to come and just meet other STer's and enjoy lunch!
Hope to see you here! Start time will be 9 am , coffee will be ready!

Randy

[Digiamo]

Rulbe and all, I would love to come to just meet everyone and tell my best lies but alas, my good friend and I are booked for a ride through PA that weekend.

Count me in on the next tech day and THANKS for doing this. It is such a great thing for the group and the machines.

Dan

[rulbe]

Hello all!

I posted the NJ Tech Event under the Tech Tab from the Home page. You can post any questions on this post as well.

Dan PA is close to NJ for a quick visit!

If not I am sure we will host another one.

Ride safe!
Randy

[2004ej]

Is any one else coming or am I going to have get more stuff for Randy to put on my bike?

Randy, do I need to bring any food or anything? Let me know.

[Bones]

Is any one else coming or am I going to have get more stuff for Randy to put on my bike?



I'm coming from WMass. Looking forward to a ride along the Delaware from Port Jervis. Any route suggestions from the Garden State contingent?

[Del]

I'm coming from WMass. Looking forward to a ride along the Delaware from Port Jervis. Any route suggestions from the Garden State contingent?

How fitting, royalty visiting the Garage Mahal.
The Phillies will be playing at home that day, maybe even the Red Sux.

[STBNE]

I'm coming from WMass. Looking forward to a ride along the Delaware from Port Jervis. Any route suggestions from the Garden State contingent?Bones from PJ head over to High point then down the other side to rte 519 south through Milford to Frenchtown...good cafe' the Frenctown Cafe' good food and pie to die for;)From Frenctown ou could take the river road south on the PA side but then you'll need to cross over the river to NJ or from Frenchtown you could take rte 29 in NJ south to Trenton...What time of day will you be in PJ? Heck I might just meet you and ride back with you...

[Bones]

Bones from PJ head over to High point then down the other side to rte 519 south through Milford to Frenchtown...good cafe' the Frenctown Cafe' good food and pie to die for;)From Frenctown ou could take the river road south on the PA side but then you'll need to cross over the river to NJ or from Frenchtown you could take rte 29 in NJ south to Trenton...What time of day will you be in PJ? Heck I might just meet you and ride back with you...

Bennie, is 519 a nicer ride than the route along the Delaware? It's hard to tell on my map if there are any water views. 519 appears to go through the New Jersey "mountains" so maybe that's better? What do you think?

[rulbe]

2004ej
Maybe some soda. I have burgers will see if anyone wants to bring anything.

Bones

Will you be down Friday night?

Look forward to seeing and meeting everyone!
PM me if anyone needs directions.

Randy

[STBNE]

Bennie, is 519 a nicer ride than the route along the Delaware? It's hard to tell on my map if there are any water views. 519 appears to go through the New Jersey "mountains" so maybe that's better? What do you think?
Let me look at my map again...519 is away from the river but as you head south it does get closer down by Milford then leads into Frenchtown.I'm not sure how much of the Delaware you will see from other roads from PJ...gotta look...BRB...From PJ you could take rt 521..its closest to parralleling the river...but still youre not gonna see too much of the river.521 is very nice but I like 519 because you can take it quite a ways further south than 521...eventually the two roads meet.Rt 611 in Pa starts away from the river but then parallels it...Better views of the river from that road..further south it becomes PA rt 32 or River road...good views of the water!When do you plan to be in PJ?

[Bones]

When do you plan to be in PJ?

Mid afternoon, I hope. More as I figure things out.

[rulbe]

Hello all!

All those that are coming October 25 could you post under the Tech Events so I can get a head count to assure no one goes hungry! Remember you don't have to need or complete any repairs to come. This event is a meet and greet! After lunch I will take everyone for a short ride to Honda Training Facility for a tour! :D

Look forward to seeing everyone!

Thanks.
Randy

[STBNE]

Randy regardless of what thread you post under ...its redundantly posted...so I dont have any issues except the front head shake...maybe determine if the head bearings sre the culprit...then take it from there.This winter I'd like to have the 40 amp upgrade installed;)Am looking to see who's got the "kit".;)

[rulbe]

Ben

John O has the tool kit. When you get ready you are welcome to come down and we can change it out here! I have done two of them, it is not that bad of job just takes a little time.

Look forward to seeing you Saturday!

Randy

[rulbe]

Hello all!

Looks like the list is growing! It should be a great turnout!

bridgelvr- Bill
Mitch
Mr. Bill
Bones
Steve ST1300
Michael
Bunson
Jimbob
pretbek
robertcshay
STBNE
Look forward meeting new and old friends!
Any special request for food?
Randy

[STBNE]

Ben

John O has the tool kit. When you get ready you are welcome to come down and we can change it out here! I have done two of them, it is not that bad of job just takes a little time.

Look forward to seeing you Saturday!

Randy
Great!... Now all I gotta do is find an alt...and all the other parts:rolleyes: I've caught a nasty cold so my saddle time is being limited this week...but I should be coming down either on 2 wheels or 4.;)

[st1300r]

Looks like you're going to have to take up a collection to add a few bays to the garagemahal LOL.

[Fster]

Well looks like I'm going to miss another NJ tech Day, my hand is still not healed and I still have one pin left in one finger. Hopefully I'll be healed by spring riding season.

[rulbe]

Fster

You can always drive over! If you have one good hand you can handle a burger in the good one! :D

Carl

Not a bad idea then I could get a couple more bikes to fill the bays! Good thing the back yard is big ( future expansion) Just have to sell it to the wife, besides I think she needs a new ride, if you know what I mean!
You going to drop by Carl? :biker: :biker: :biker: :biker:

See you all later!
Randy

[TRNewtown]

Please add my name to the list. Do you think that I would be able to replace both tires? I have the new tires sitting in my garage.

Also, let me know what I can bring for lunch (i.e. burgers, chicken wings, etc.).

Tom

[rulbe]

Tom
No problem on the tires.

Chicken wings sound good to go with hamburgers that I have.

See you Saturday!
Randy

[Mr Bill]

Cannot make the big day. Elder care (mom) duties supersede pleasure again.

Enjoy the day.