Need some help

[MNwing]

Could someone answer a couple of questions I have about hooking up the power sources for a Roady 2 and a 2610? Not sure where to connect the wires for both of them, have ST parts all over the garage from installing the heated grips and want to get it put together so I can ride this weekend, so any help will be greatly appreciated.

Thanks

Bob

[billxp]

I just tapped into the quartet harness. Well actually the bike side of the harness since I couldn't wait for one to come. There's a wire breakedown posted here http://www.st-owners.com/forums/showthread.php?t=3524

I just used a test light and found a switched 12 volt circuit.

Borrowed from above link:
NOTE: Color <-> Color = Harness Side <-> Bike Side

9-Pin Clear Connector at bike for quartet harness
Red/Green <-> Red/Green - Constant 12V
Light Green/Black <-> Red/Green - Switched 12V + ACC 12V
Orange <-> Orange - Left Turn Signal
Light Blue <-> Light Blue - Right Turn Signal
Red/Black <-> White/Green - Switched 12V
Green <-> Green - Ground

Pic maybe found here
http://www.st-owners.com/forums/showthread.php?t=6426&highlight=QUARTET+harness