Update time! The subframe is still not finished. Life 'n all that, you know? I have a friend with a mill making me a top triple to go with an MX Bonz bar clamp I got. After searching eBay almost daily since this thread started for a radiator that wasn't $7 less than a new one (ahem- suncoastcycles), I found one, along with the fans, a clutch master cylinder with lever, a left handlebar switch, and a big 'ole box of nuts and bolts and miscellaneous hardware from a parted out ST1300. My junk hardware drawer runneth over.
Also, I was doing some unrelated research via microfische and eBay and discovered a potential parts compatibility for this project that will blow your minds. I don't want to go into it and get your hopes up, but I have some parts on the way so I can test my theory. If what I believe to work will work, it's going to take this project to a whole new level. Stay tuned... this discovery might be huge.
Also, I was doing some unrelated research via microfische and eBay and discovered a potential parts compatibility for this project that will blow your minds. I don't want to go into it and get your hopes up, but I have some parts on the way so I can test my theory. If what I believe to work will work, it's going to take this project to a whole new level. Stay tuned... this discovery might be huge.