PopJack
Die young, after a long life.
While going over bike, I found a rubber hose that is obviously loose at the top connection point. I was not planning on taking off the tupperware and am hoping that someone can help tell me what it is so that I remove the minimum amount of plastic.
It is about 3/8" with an inside diameter of 3/16 or so. It is obviously a vent of some kind. There is another hose held near it loosely in a bracket- maybe 1/2" in diameter.
When I tugged on it, it came down to the garage floor, so somewhere along the line I have taken it loose and not replaced it.
It seems that whenever this bike has had a problem, it has been tracable o me- and I suspect this is a similar case.
It is about 3/8" with an inside diameter of 3/16 or so. It is obviously a vent of some kind. There is another hose held near it loosely in a bracket- maybe 1/2" in diameter.
When I tugged on it, it came down to the garage floor, so somewhere along the line I have taken it loose and not replaced it.
It seems that whenever this bike has had a problem, it has been tracable o me- and I suspect this is a similar case.