So, I can't remember how to put the rubber flap behind the evap canister back on. I know where the factory zip tie goes but I cant remember the rest. Anybody have a picture or maybe the right side cover off? Any help would be rewarded with milk and cookies!
Need some help with the rubber flap
- Thread starter barracuda
- Start date
- Joined
- Nov 20, 2005
- Messages
- 9,512
- Location
- Cedar City, Utah
- Bike
- 12/04 ST 1300s
- 2024 Miles
- 000148
- STOC #
- 5901
I looked at all the pictures I had, but really don't see anything. You can go here and I have one shot of that area, but it isn't a close up!
Wrecked2004
Wrecked2004
BakerBoy
It's all small stuff.
I probably have a pic or two at home that may help; I'll look through them this evening.
BakerBoy
It's all small stuff.
I took a few pictures of the canister area a couple weeks ago, but I deleted them, sorry. Attached are the only two I can find in my archive...
Attachments
Thanks guys, Bakerboy, the first helped alot. I didn't remember the flap twisting before the evap canister. Mike
- Joined
- Dec 12, 2004
- Messages
- 1,282
- Age
- 76
- Location
- Weatherford, TX
- Bike
- '16 Versys 650LT
- STOC #
- 1134
Don't know if this was taken at the right angle for you but it shows the rubber sheet and the zip tie:
