after riding in the Idaho Mountains for three days I noticed that the brake peddle felt soft, but pumped up ok. But when I had to stop for a red light The brake peddle went bottomless and even s a second one was the same. Felt the same as when you're bleeding your brakes. because I was close to home at that point, I quite using the rear brake.. But found no leak.. after further inspection I noticed that the rear caliper pistons where extremely exposed about 1/2 in ..I assume that is where the fluid went the pads are extremely worn. And I replaced them only 2000 miles ago .. Double-H Sintered Metal Brake Pads - FA261HH
Part #194900 from Dennis kirk the question is how did/can a brake pad deterate in such a fashion there's NO rotor groves or bluing from excessive heat that it would take so may pumps about 4-6 when I arrive at home a could see there wasn't any leak
can anyone recommend a high end brake pad that it will work alright with my stock rotors
Part #194900 from Dennis kirk the question is how did/can a brake pad deterate in such a fashion there's NO rotor groves or bluing from excessive heat that it would take so may pumps about 4-6 when I arrive at home a could see there wasn't any leak
can anyone recommend a high end brake pad that it will work alright with my stock rotors