19mm allen socket alternative

The u Joint replacement requires a 19mm Allen socket to torque the swingarm bolt(s). If you don't have one in your toolbox, try this: locate a craftsman 5/8 inch spark plug socket and remove the little rubber piece, then insert a 6 inch extension into the socket and you now have a 19mm tool that will work for your swingarm bolts.
.02

The same trick works on the front axle on a BMW. Craftsman 13/16 spark plug socket turned around is a 22 mm hex head.

Thanks for the tip. At some point in the future there is a U joint replacement due and this will come in handy.

dduelin said:

Thanks for the tip. At some point in the future there is a U joint replacement due and this will come in handy.

Click to expand...

When that time comes don't fight the swingarm and 02 sensor wires. Don't try to unscrew them and risk breaking a wire, simply follow the wires up and disconnect the conectors. This way you can completely remove the swingarm and take it to your workbench and inspect, clean, and pack the bearings.