front RH caliper

ST1100Y

Site Supporter
Joined
Dec 4, 2012
Messages
4,980
Age
59
Location
Vienna, AuSTria
Bike
ST1100Y, ST1100R
STOC #
637
...in every other respect they look identical. still stumped
Only that the lugs for the calliper bracket sit further outward... not obvious when looking at the from the side/profile, only when looking down while holding them vertically side by side... or when trying to install the non-ABS calliper...
 
OP
OP
Joined
Nov 2, 2015
Messages
12
Location
southport uk
how right you are but an easy fix with a different caliper bracket all done and dusted , thanks everyone.
 

ST1100Y

Site Supporter
Joined
Dec 4, 2012
Messages
4,980
Age
59
Location
Vienna, AuSTria
Bike
ST1100Y, ST1100R
STOC #
637
how right you are but an easy fix with a different caliper bracket all done and dusted...
Sure, simply throw the reinforced ABS-I/TCS calliper bracket on and go...
But: how are you now going to fix the non-ABS fork-brace (with M6 threads) to the RHS ABS-I/TCS fork-leg with the 8mm bores?? ;-)
 

ST1100Y

Site Supporter
Joined
Dec 4, 2012
Messages
4,980
Age
59
Location
Vienna, AuSTria
Bike
ST1100Y, ST1100R
STOC #
637
Ah, so you've replaced both fork-bottoms... that info puts an end to the guesswork ;-)
 
OP
OP
Joined
Nov 2, 2015
Messages
12
Location
southport uk
sorry yes i got the bike which had been in a slight front end hit ( bent forks ) so i replaced them and the steering stem just in case
 
Top Bottom