OK so this is the story
1100 Pan 2000 - ABS/TCS/CBS - new seals on front caliper pistons and front master cylinder, new fluid through both front and back. Wheels spin freely before go out then when I ride after about 1 mile feel brakes beginning to seize. Discs hot - if carry on riding the brakes lock completely. Can ease it by loosening the banjo bolt to master cylinder and ride for another mile then same happens. I've checked master cylinder seals and they are in the right way - wide part towards the spring. It feels as if the hydraulics are becoming pressurised and can't flow back into the reservoir.
Any ideas or suggestions on how to work this out much appreciated - Cheers Chris
1100 Pan 2000 - ABS/TCS/CBS - new seals on front caliper pistons and front master cylinder, new fluid through both front and back. Wheels spin freely before go out then when I ride after about 1 mile feel brakes beginning to seize. Discs hot - if carry on riding the brakes lock completely. Can ease it by loosening the banjo bolt to master cylinder and ride for another mile then same happens. I've checked master cylinder seals and they are in the right way - wide part towards the spring. It feels as if the hydraulics are becoming pressurised and can't flow back into the reservoir.
Any ideas or suggestions on how to work this out much appreciated - Cheers Chris