pan power point .

hi there.
first post , can anyone tell me where and how to fit a power point and fan bypass switch please. thanks bill.

Hi Bill, a power point can be mounted almost anywhere (a simple waterproof cigarette lighter type fitting) the easiest way is to run the wiring direct from the battery terminals but you must use a fuse on the positive side close to the battery, the fan bypass switch can be wired by extending the existing wires on the radiator thermo switch mounted on the radiator (a simple operation), If the thermo switch is working but you want to manual switch just in case leave the wires connected to the original thermo switch on the radiator and splice extended wires from it to your manual on.. off switch .... if you see what I mean.

thanks for the info dinosaur , there is only one wire on my thermo switch.
bill.

That would be the positive run another wire from the switch to earth on the frame, I get confused some bikes have two Honda must have been saving wire like they did on the charging system!

billybop said:

...there is only one wire on my thermo switch.

Click to expand...

Cause the fan-stat "shunts" to ground...

thanks again , boys.