Which Way? 1300 Shock

Got my shock back from Racetech today. Problem is I didn't pay enough attention to it's orientation when I removed it a month ago.
So how does it go in:
Is the rebound adjuster on the right or left?
Is the hose to the preload adjuster on the top or the bottom?

Thanks,
JIM

The rebound adjuster needs to line up with the port provided in the frame on the right....line that up and everything is as it should be.

Thanks pyro. I guess I just needed a break and lunch. After lunch I went out to look at it again and said, "DUUH!"
ride straight,
devro

I think there's some law of physics that says the "duh" reaction can't happen until after you've posted about it.

--Mark

You can't really put it in upside down, the fittings are different so it's just a matter of orienting the rebound adjuster to the right so it's accessible.

Don't you know that's right! LOL

wjbertrand said:

You can't really put it in upside down, the fittings are different so it's just a matter of orienting the rebound adjuster to the right so it's accessible.

Click to expand...

I didn't mean inverted or up-side-down, I meant does the preload hose go forward or rearward. another "duhh".
thanks

devro said:

I didn't mean inverted or up-side-down, I meant does the preload hose go forward or rearward. another "duhh".
thanks

Click to expand...

The pics in Post #1 in this thread https://www.st-owners.com/forums/showthread.php?106715-ST1300-Pre-load-Fluid-Replacement&highlight= show the orientation of the preload hose fitting to the upper shock body.