- Joined
- Oct 17, 2015
- Messages
- 1,960
- Location
- near Harrow, Ontario, Canada
- Bike
- '83 BMW R100RS
- STOC #
- 8870
Nice work and a great write-up.
Pete
Pete
John - I just fixed that. I wasn't aware I had that setting turned off!Was going to email you just now but see you don’t email here, and I don’t PM.
John
I as well as a few other members ordered them direct from the manufacturer in China. They took a couple of weeks or three to arrive and were cheaper than Amazon. The email address for 'Cindy' is in the thread.I've noticed the Evitek G6 H4's have not been available on Amazon for several weeks now.
Last name is Bhakta. I don't know what my STOC# is.Thanks, Jay! Full attribution of course. On ST-Riders, always!
BTW, what's your last name (and STOC number) for the record?
John
Then you may not have one. I believe you can/have to apply for one. If I was to do so it'd look like a phone number!I don't know what my STOC# is.
Thanks, Jay! Full attribution of course. On ST-Riders, always!
BTW, what’s your last name (and STOC number) for the record?
John
Thanks, Jay.Last name is Bhakta. I don't know what my STOC# is.
Sent from my SM-G930V using Tapatalk
Why get a STOC#?Thanks, Jay.
Get a STOC #: https://www.st-owners.com/forums/showthread.php?2025-Getting-a-STOC&p=1559685&viewfull=1#post1559685
John
More room is always better but it's really not necessary to wait if you don't want to. I had very little trouble (only closing the bail) making the swap from the top. Maybe not the best way to do it but more than good enough.STGUY said:It looks to me that this is best to do when I have the forks out to change the fork oil. I believe that would give you more hand space from underneath.
To the front they can be white or amber. To the rear it's red. 25106 CVC.CruisingDog said:I believe in California that the running lights have to be orange.
I exchanged also the Headlights to LED.
They are very very bright, have a excellent sharp edges and are easy to install
Fantastic write-up. I've had this saved for some time. Now, to actually do this. For those of you who've followed this procedure... has anyone tried doing this via option #1 or #2? Only asking since I'm not sure how much is involved with options #3 thru #5How many ST riders does it take to change a light bulb???
Next item is how to access the bulbs. I used option #3 but other common solutions are (see images)
ALL DONE!!!! Now get out and ride! Stay safe!
- Reach in from from the front of the bike and below the headlight housing
- Reach in from above behind the handlebars
- Remove the dash/instrument panel
- Remove the front windscreen and surrounding plastics
- Remove side fairings