I have a 2005 abs ST1300 and the horn has stopped working. Its a Stebel and I took it off, ran power to it from a separate battery and it works. I changed the connectors on the wiring connecting power to the horn, didn't work.
The relay is clicking when I turn on the key and push the horn button, but I don't seem to be getting power to the horn itself.I'm assuming the relay works because its clicking, is this correct? I also have clearwater lights hooked into the horn wire that goes into the relay and horn that flash the lights to full power when the horn is honked. I assumed that the horn switch was okay beings that the flashing lights function works.
Is that assumption incorrect ? I'm pretty ignorant with electronics but learning. slowly.
I have a multi meter but don't know how to test the wiring to see where the power is deficient.
I can take pictures if it helps show what I'm talking about.
The relay is clicking when I turn on the key and push the horn button, but I don't seem to be getting power to the horn itself.I'm assuming the relay works because its clicking, is this correct? I also have clearwater lights hooked into the horn wire that goes into the relay and horn that flash the lights to full power when the horn is honked. I assumed that the horn switch was okay beings that the flashing lights function works.
Is that assumption incorrect ? I'm pretty ignorant with electronics but learning. slowly.
I have a multi meter but don't know how to test the wiring to see where the power is deficient.
I can take pictures if it helps show what I'm talking about.