Hi all, am getting 26 blinks on my st13 O5 model recently and went to a couples of workshops trying to fix but came back with no result. All they tell me is ecu spoilt. So main concern is am I still be able to ride normally when the light is up or will it cause any damage to my bike? Pls advise thanks!
Fi 26 blinks
- Thread starter Jeremyzach
- Start date
Re: Fi 26blinks
I don't have an answer for your question, however if you will use the website search function for FI code 26 you should find much information about the code and solutions.
I don't have an answer for your question, however if you will use the website search function for FI code 26 you should find much information about the code and solutions.
Essentially, it's one of two things - Most likely, it's a bad ECM. Get a new one and plug it in.
It could also be bad wiring, or a bad connection where all of the harnesses plug together. Check the continuity from the knock sensor back to the ECM plug. If the wiring is good, it's the ECM.
It could also be bad wiring, or a bad connection where all of the harnesses plug together. Check the continuity from the knock sensor back to the ECM plug. If the wiring is good, it's the ECM.
DavidR8
Site Supporter
- Joined
- May 31, 2017
- Messages
- 1,221
- Location
- Vancouver Island, British Columbia
- Bike
- 2013 BMW R1200RT
- STOC #
- 8968
If only it was that easy.
FI code 26
https://r.tapatalk.com/shareLink?share_fid=913&share_tid=160839&url=https://www.st-owners.com/forums/showthread.php?t=160839&share_type=t
Sent from my iPhone using Tapatalk
FI code 26
https://r.tapatalk.com/shareLink?share_fid=913&share_tid=160839&url=https://www.st-owners.com/forums/showthread.php?t=160839&share_type=t
Sent from my iPhone using Tapatalk