This is great. Does anyone know the PN's for these various bolt/fasteners. A few of mine have disappeared and I'd like to replace them. Thanks.What do you do with all the fasteners when you take off your Tupperware?
Well I made these worksheets to keep track of mine.
The idea is as you remove the fasteners, you place them on the correct spot on the worksheet. It helps me keep track of all the parts and it reminds me of all the fasteners that have to be removed first before you try to pull the piece off. Also, each fastener is numbered so you can see the location where it came from - and where to put it back.
Note, I have labeled some of the socket bolts as 5mm or 6mm - this is the thread size. Also there are two different sizes for the trim clips - one has a golf T shaped head and the other is flat.
This is what the sheets look like loaded up:
3rd worksheet added:
Here are the links to the full page pdf files:
Page 1
Page 2
Page 3
1-13-2012 Update
"The Dan" added numbers (in red) for each fastener and wanted to share. Here are links to the files - (Thx Dan)
Page 1 (with numbers)
Page 2 (with numbers)
Page 3 (with numbers)
I'm after the same information too so any input would be much appreciated.
Here are some part numbers and prices (prices go back to 2015 for this first batch):
| Quantity | Fiche # | Description | Honda # | Need | $$$$ | |
| Lower Cowl | ||||||
| 2 | 22 | 5 x 12 screw | 90106-MBY-000 | 4 | 1.54 | |
| 4 | 5 x 12 screw - side cowls | 90106-MBY-000 | 4 | |||
| 1 | 26 | 90118-MR1-000 | 6 | 1.96 | ||
| Inner Lower Front Cowl | ||||||
| 2 | 27 | 5 x 13 lower screws | 90133-MCS-G00 | 8 | 0.62 | |
| 32 | pop rivet NH1 | 91549-MW0-790ZA | 8 | 2.66 | ||
| Middle Cowl | ||||||
| 24 | push rivet under engin guard | 90683-MBW-003 | 4 | 1.35 | ||
| Upper Inner Cowl | ||||||
| 25 | Flush push rivet | 90116-SPO-003 | 3.12 | |||
| Side Cover | ||||||
| 8 | 6mm screw | 90106-MBL-610 |
| Upper Cowl | ||||||
| 7 | Washer - Mirror Cover Set Sprng | 88115-MT3-000 | 3 | 4.35 | ||
| 17 | Flanged Nut for Mirror Spring | 94050-05000 | 3 | 0.68 | ||
| Crankcase | Oil Drain Plug Washer 14mm | 94109-14000 | 4 | 0.05 | ||
| Lower Cowl | ||||||
| 30 | Splash Shield Clip | Lower Cowl push rivet | 90657-SBO-003 | 2 | 3.21 | |
| 32 | Clip NH1 | Lower Inner Cowl push rivet | 91549-MWO-790ZA | 2 | 2.66 | |
| Windscreen | ||||||
| 17 | Rivet, Puh | Also lower cowl | 90116-MCS-GOO | 4 | 0.78 | |
| 33 | Clip, Splash Shield | See lower cowl | 90657-SBO-003 | 2 | 3.21 | |
| Muffler | ||||||
| 7 | Clamp, Right | 18371-MAT-0001 | ||||
| 8 | Clamp Left | 18372-MAT-0001 | ||||
| 10 | Gasket | 18391-MLO-003 | ||||
| 19 | Bolts | 90103-KLM-620 |
Thanks, that's very useful. If I may be so bold to ask... does anyone sell a push rivet kit that contains all of the various rivets needed? I'd like to have some replacements on hand, but it gets expensive buying them in small batches.
I thought you were taking notes?
Cruel, cruel, cruel...I throw ALL the fasteners, push rivets, and clips into a single stainless steel bowl while working, just because I love to see the look of panic on folks faces
There are only a few different size allen head bolts, clips, and pins, and I can tell you where they go by feel....even with my eyes closed
In between those thwacked to the back of my head shots!!!![emoji3061].
Yeah, I do miss not having anyone up here to thwack in the back of the head yet
