CYYJ
Michael
Thanks Kevin, much appreciated.
Michael
Michael
From the looks of your profile photo, it would have been easier to work on this issue at the time of the picFirst of all, many thanks to John for creating these excellent worksheets, and thanks to Mellow for hosting them.
I am a bit perplexed about holes present on the underside of my motorcycle, at the very front, just inches behind the front wheel. The Tupperware worksheet identifies the push-rivets that go into three of the four holes (the forward-most three), but does not mention what goes into the aft-most hole that I have called out on the photo below.
Can anyone help identify what type of fastener is used in the aft-most hole? Is it possible that Honda made a production change (I have a 2012 model)?
Michael
FYI, I have a 2007 ST1300, and all of the socket bolts are 5mm. I don't have any 6mm head bolts holding any of the tuperware on.Note, I have labeled some of the socket bolts as 5mm or 6mm
Hello All - wondering if anyone has developed a complete replacement order form of all the plastic fasteners. I have disassembled my 2003, and about 70% of the fasteners disintegrated. Any assistance would be enormously appreciated!!