Hi sennister,
I have a problem with the connections. I tried to check if the TDR works before installing everything and here is what I did:
I cut the Blue/white and Red/black as per your instructions in the first post, and then
1. From the bike I took the Black.red and I connected it to 1 and +12 on the TDR
2. From the bike, I took the Blue-white and connected it to the G on the TDR
3. From the TDR I connected the L to the Black/red that goes to the lights
4. From the TDR I connected the G(again) to the Blue/white that goes to the lights.
The TDR works OK and I can set the delay I want. But it gets so HOT the you can hardly touch it and after approx a minute it started smoking.
I am almost certain that I did something wrong, can you please help?
Also, I am not planning to install HID's for the moment since I haven't ordered them yet. Can this relay withstand the Halogen's load?