Add 4mph To Your ST1100's Top Speed!

[papalon]

Hi all. Looking on this screw washer from under the light, front wheel plastic casing. Also some of them plastic screws & push pins as well. Will come in handy all these little bits hahhaha. Cheers

 

[papalon]

I know this is an old thread but still relevant. I just put the dimpled cowl bolts in to replace the chewed up philips screws. Have not verified increased top-end yet. Does anybody know if the two bolts that hold the shelter at the top by the steering head have similar replacements? These are also chewed up philips screws. They are not in any direct air flow so it's unlikely any aerodynamic improvements will be seen. It would be nice to be able to use one multi tool hex wench to take off all the plastic rather than grab a philips driver for these odd fasteners.

Hi there. I no this from time ago but hope you can advise me onto were to buy them screws you have mentioned? Be happy if you in uk cheers

 

[John OoSTerhuis]

Hi there. I no this from time ago but hope you can advise me onto were to buy them screws you have mentioned? Be happy if you in uk cheers

The screws/bolts mentioned are Honda parts so go to your local dealer, or an online source like David Silver Spares in the UK:

David Silver Spares

David Silver Spares UK specialise in Honda motorcycle parts and accessories from the 1960s to 2008 models. Online Honda Part number search, Worldwide delivery

www.davidsilverspares.co.uk

Hope that answers your query.

Regards, John