Bleeding Brakes on a 2005 ST1300

[timc490310]

I am new to the st1300 and have a really nice 2005. I flushed the clutch fluid, it was pretty dirty, and was looking into doing the brakes. My question is can I vac out the fluid on the front and rear calibers and keep refilling and be done or do I need to take off the plastics and bleed the valve on the right side of bike? The bike not an abs model . Thanks

 

[Igofar]

I'm your huckleberry

 

[dduelin]

The short answer is no. The brake system flush and bleed sequence is not negotiable. It is not inherently difficult to do but has to be done in a certain sequence with the left brake caliper removed and tilted 15 degrees at the proper time in the sequence.

 

[Igofar]

Like Dave pointed out, you have to follow a certain sequence to do it correctly.
I got your PM, I'll call you tomorrow.

 

[SMSW]

You might read this article before talking to Larry. It will help you understand what he is explaining and perhaps save him some time. You can either hit the blue link below, or go to the blue band at the top of this page: Articles > ST1300 > Brake fluid replacement.

https://www.st-owners.com/forums/threads/st1300-brake-fluid-replacement.68913/