punchy6538
Punchy
Hi, anyone recommend a decent phone holder/ attachment and where to fix it, seems pretty short on space on the handlebars.. thanks..
I just added that one myself and also the vibration dampener since mine is attached to the handlebars.
I've been "worried" about the vibration, but 20k plus miles and my phone hasn't complained. Let me know how it works.I just added that one myself and also the vibration dampener since mine is attached to the handlebars.
Yours is on the dash so isn't getting the harsh vibrations transferred from the wheel/front suspension to the bars.. I used on my NatSTOC trip and worked fine. I figure at $20 is was fairly cheap insurance vs the phone cost lol.I've been "worried" about the vibration, but 20k plus miles and my phone hasn't complained. Let me know how it works.
Hey @Willsmotorcycle and @Mellow what's the ball behind the Quadlock head? I'm looking to do the same, but like you I have RAM component's and the QL balls are 22mm while the RAMs are 1" (25.4mm). QL says, Please note: The Dual Pivot Arms are not designed to be compatible with RAM mounting systems, please see the 1" Ball Adaptor for a compatible solution."
Mine uses a bar mount not a ram mount as I have risers on my RT that has a bar-like section. I believe they are standard 1" ram balls on Wills.Hey @Willsmotorcycle and @Mellow what's the ball behind the Quadlock head? I'm looking to do the same, but like you I have RAM component's and the QL balls are 22mm while the RAMs are 1" (25.4mm). QL says, Please note: The Dual Pivot Arms are not designed to be compatible with RAM mounting systems, please see the 1" Ball Adaptor for a compatible solution."
Do smaller QL balls play nice with RAM arms that use the 1"/25mm balls? I expect they could but have no firsthand experience.
Tom, I had no idea what you were talking about lol, I had to read it a few times. I looked at my history and yes, I bought the 1" ball adapter. Joe is on top of it as usual! Nice Joe!Hey @Willsmotorcycle and @Mellow what's the ball behind the Quadlock head? I'm looking to do the same, but like you I have RAM component's and the QL balls are 22mm while the RAMs are 1" (25.4mm). QL says, Please note: The Dual Pivot Arms are not designed to be compatible with RAM mounting systems, please see the 1" Ball Adaptor for a compatible solution."
Do smaller QL balls play nice with RAM arms that use the 1"/25mm balls? I expect they could but have no firsthand experience.
I bought the case for my phone.How secure is the quadlock attachment to the back of the phone (the glue on part)? My main phone does not have a smooth back so I was a bit leery of that so didn't buy one.
I have a case specific for my phone, super secure, no glue. I figure it has to work and the phones expensive, not a place I'm trying to skimp, I'd rather cut corners in other places. Not implying you're trying to save money, just my perspective.How secure is the quadlock attachment to the back of the phone (the glue on part)? My main phone does not have a smooth back so I was a bit leery of that so didn't buy one.
That would work. Unfortunately, they do not have a case that fits my phone.I have a case specific for my phone, super secure, no glue. I figure it has to work and the phones expensive, not a place I'm trying to skimp, I'd rather cut corners in other places. Not implying you're trying to save money, just my perspective.