chiller
Chowdah Ridah
So I changed my tire this afternoon, put the wheel back in and button everything back together... tire spins fine...
I took it for a quick test spin and came back. I 'feel' like I'm using more clutch to get it moving from a stop. I put it on the center stand and spin the rear wheel, it does NOT spin easily. Also the caliper feels warmer then the front. So I put a screwdriver in between the pad and rotor and push the pads back in just a tad. Tire spins fine again ! If I tap the rear brake pedal it activates the brake but again doesn't want to "let go" ...
My bike is still under warranty with about 130k km = 80k miles on her. Wonder if this is a caliper issue or something else ? brake bleed was done about 2 months ago and was riding fine for a while (including a trip between then and now)
thoughts ?
I took it for a quick test spin and came back. I 'feel' like I'm using more clutch to get it moving from a stop. I put it on the center stand and spin the rear wheel, it does NOT spin easily. Also the caliper feels warmer then the front. So I put a screwdriver in between the pad and rotor and push the pads back in just a tad. Tire spins fine again ! If I tap the rear brake pedal it activates the brake but again doesn't want to "let go" ...
My bike is still under warranty with about 130k km = 80k miles on her. Wonder if this is a caliper issue or something else ? brake bleed was done about 2 months ago and was riding fine for a while (including a trip between then and now)
thoughts ?