Throttlemeister problem

STreaker

STreaker

Joined
Feb 16, 2007
Messages
157
Location
Olympia, WA
Bike
2003 ST1300
I had my tire changed at my local dealer when a mechanic noticed I had loose grips. I agreed to another pair which they installed. Arriving home, I noticed my Throttlemeister didn't have any contact at all with the throttle tube, i.e. there is no grip. Any suggestions before I go back to the dealer?
 
I have a 16 yr.old TM...(TM told me they are all pretty much the same...)
But there is a washer(s) that need to go on to space the gap between the end and the throttle tube...Sounds like the gap has changed,or too many washers are on....? I would take it back!
 
forgitaboutut said:
I have a 16 yr.old TM...(TM told me they are all pretty much the same...)
But there is a washer(s) that need to go on to space the gap between the end and the throttle tube...Sounds like the gap has changed,or too many washers are on....? I would take it back!
Click to expand...

I believe they forgot the washer...Not the first time they forgot to replace an item. Thanks!
 
Jon, i have the same problem with my TM right now. I installed a Throttle Tamer on mine and now it will not engage. The washers i believe push the lock away from from the tube. I have not had time to pull things apart yet. It looks like the throttle assembly has
moved over a bit on mine and that could be a problem but there is a pin that holds it in place, so i am not sure what the problem is
at this time. Hope this helps. Peterz
 
peterz said:
Jon, i have the same problem with my TM right now. I installed a Throttle Tamer on mine and now it will not engage. The washers i believe push the lock away from from the tube. I have not had time to pull things apart yet. It looks like the throttle assembly has
moved over a bit on mine and that could be a problem but there is a pin that holds it in place, so i am not sure what the problem is
at this time. Hope this helps. Peterz
Click to expand...
yep! sounds like something moved....because if you put it together with NO washer(s)..the throttle would stick...without even engaging the TM...(at least that was my experience when installed mine...)
 
You must log in or register to reply here.
Back
Top Bottom