aniwack
Site Supporter
Does anyone have the leak to the Italian 90 degree valve stems that fit the 1300 rims? All of my reference links were lost when the site crashed to the wholesaler.
Italian Valve Stems
- Thread starter aniwack
- Start date
VALVE STEMS
KurveyGirl.com - Dzus, Vesrah, Brembo, Titanium, Spring Clips and More
www.kurveygirl.com
Just Google’aluminum 90 degree valve stems’ and find many suppliers.
OP
OP
aniwack
Site Supporter
After several days of hunting, I have located the Bridgestone wholesaler.
https://www.carpimoto.com/en-US/28694_VL90113S-90-Degree-Angled-Bridgeport-Aluminum-Tire-Valve.htm
https://www.carpimoto.com/en-US/28695_VL90113B-90-Degree-Angled-Bridgeport-Aluminum-Tire-Valve.htm
https://www.carpimoto.com/en-US/28694_VL90113S-90-Degree-Angled-Bridgeport-Aluminum-Tire-Valve.htm
https://www.carpimoto.com/en-US/28695_VL90113B-90-Degree-Angled-Bridgeport-Aluminum-Tire-Valve.htm
Andrew Shadow
Site Supporter
I got mine from MOTOMILLION. He was/is a member and a vendor on this site. Don't know if he is still a member or not. He is in Florida I think.
He was really good to deal with and his shipping was fast and cheap as it was not overseas. His price seems to be higher than what you have found but when the shipping from Italy is added that may no longer be the case. He does list a price match policy.
Link below;
MOTOMILLION
There is also Kurveygirl which is a popular source.
Kurveygirl
Consider T-stem valves as well if you are considering a valve stem mounted TPMS system. They are available from multiple sources.
He was really good to deal with and his shipping was fast and cheap as it was not overseas. His price seems to be higher than what you have found but when the shipping from Italy is added that may no longer be the case. He does list a price match policy.
Link below;
MOTOMILLION
There is also Kurveygirl which is a popular source.
Kurveygirl
Consider T-stem valves as well if you are considering a valve stem mounted TPMS system. They are available from multiple sources.
Last edited:
I'll check my toolbox this weekend, I may have a spare set or two of the original Bridgeport (manufacturer) right-angle valve stems. If not, I recommend KurveyGirl (she sells the 2nd generation version) or Carpimoto (old friend). Not a fan of Motomillion.
FWIW, I run them on 90% of my bikes. If they aren't on them now, it's because the bike is still on it's original tires.
I prefer T-stems for use with TPMSs.
will these work on an ST 1100? if i'm ordering some for the ST 1300 might as well get some for the ST 1100 to
ST Gui
240Robert
Yes. I like the T-stems because I have a TPMS on the stems and it doesn't have to be removed to air up. The low profile 'Italian' stems are aesthetically more pleasing to me but I'm lazy. I believe the 1100 uses 11.3mm stems same as the 1300.
"My" 90 degree valve stem collided with the rear ABS cable - with predictable results.
Spoiler: it wasn't the stem that gave in ...
But I should not complain: I was able to buy the bike cheap due to ABS malfunction.
Spoiler: it wasn't the stem that gave in ...
But I should not complain: I was able to buy the bike cheap due to ABS malfunction.