A really customized saddle....

Joined
Sep 4, 2013
Messages
996
Location
Cleveland
Bike
2010 ST1300
I stumbled across this bike at a small engine show. The custom seat builders have a lot to learn....

IMG_0695.JPG
Note the 6x30 amp fuse panel on the front of the right side pannier.

The whole bike:
IMG_0691.JPG

Close up of switch gear...dielectric grease is not needed.
IMG_0693.JPG

The other side.
IMG_0697.JPG
 
Looks like an old Mercedes diesel. I bet is is a real slug for acceleration. Probably measure 0 to 60 with a calendar.
By design.
If ya go too fast, fewer people will see ya.
Looks for show, not for go.
Might take 8 months to ride it cross country, what with things likely to break down or fall off.
 
Back
Top Bottom