Hi all from Yorkshire uk

Just fitted the rises there bike-quip ones every thing feels good apart from the throttle cabels when in hard left lock there very tight is this normal?
 

Attachments

  • IMG-20260912-WA0010.jpeg
    IMG-20260912-WA0010.jpeg
    121.6 KB · Views: 6
vfr400boy said:
Just fitted the rises there bike-quip ones every thing feels good apart from the throttle cabels when in hard left lock there very tight is this normal?
Click to expand...
No. I had the bike-quip risers. I needed to slightly re-route the brake hose - ie unclip it from under the bars, but the throttle cable was not an issue. Check the workshop manual - it has diagrams in section 1 showing the routing; make sure that there is some free play in the cable - maybe someone has adjusted it all out - and a slight change in routing will make the inner cable even tighter - you can adjust the outer cable at the throttle grip - the metal tubes, and at the throttle wheel under the airbox.

The 2003 manual is readily available on-line if you search for it.
 
jfheath said:
No. I had the bike-quip risers. I needed to slightly re-route the brake hose - ie unclip it from under the bars, but the throttle cable was not an issue. Check the workshop manual - it has diagrams in section 1 showing the routing; make sure that there is some free play in the cable - maybe someone has adjusted it all out - and a slight change in routing will make the inner cable even tighter - you can adjust the outer cable at the throttle grip - the metal tubes, and at the throttle wheel under the airbox.

The 2003 manual is readily available on-line if you search for it.
Click to expand...
Iv just had another good luck and it was the brake pipe iv unclipped it and now its loads better thank you
 
You must log in or register to reply here.
Back
Top Bottom