Penske Reservoir Bracket

Here is the Penske Reservoir bracket I came up with. I designed this to attached to the existing adjuster bar on the left side. I'll need to come up with some sort of an L-bracket. Anyway, once powder coated, I'll drill and tap the tabs. I also sized the ring to accommodate a rubber gasket if you will. Figure this will help with vibration and protect the finish on the reservoir.

I had the same guy who made my antenna bracket cut this out for me. I think he did an awesome job! I'll post more pics once it's installed and ready to go.

Hmmm..... makes my twin hose clamp set up look pretty lame. Looks like nice work. :yes:

i grabbed the drill and put two holes in the passenger foot peg bracket ,left side away from the battery gives more foot room, and used two zip ties. Your hose clamps are looking mighty fancy to me lol

I would do all the drilling and taping before they are anodized. That way you can buff out any scratches that may happen before they get treated.

Finally got around to installing the bracket. Looks good after powder coating. I used an old light bracket to attach it to the old adjuster support rod thingy.

Looks pretty good from here! Isn't interesting what we can come up with using old parts?