FL-STrider
Roughing it smoothly
- Joined
- Feb 14, 2005
- Messages
- 124
- Age
- 63
- Location
- New Port Richey, Florida
- Bike
- 2004 ST1300
- STOC #
- 5946
What a huge help this was. I was having an issue with a knock sensor and thought while I got all the plastic off I might as well bleed the brakes and replace all the pads since I've never done either. Let me tell you my brakes are working great and the fluid was brown. I also did the clutch. You'll need two pints of fluid and a power bleeder sure does help too. This was something I was always afraid to do because of the complexity of the linked/ABS brakes. I was shocked at the cost of the pads about $40/pair and you need 3 pairs ( 2 for the front and 1 for the rear).