04 ST 1300. new

Joined
Nov 22, 2026
Messages
1
Age
60
Location
United States
Bike
04 ST 1300
2004 Honda ST1300 – FI Code 26 Issues and Looking for Previous Owner

I recently purchased a 2004 Honda ST1300 with approximately 46,000 miles. The bike originally came out of northwest Georgia and was sold this past summer to a gentleman in Scottsboro, Alabama. I'm posting pictures in hopes that someone in this group recognizes the bike or knows its history.

I'm currently chasing an intermittent FI code 26 (knock sensor circuit).

Here's what's going on:

The bike starts easily, runs smoothly and maintains three bars on the temperature gauge.

The FI light typically comes on when riding above 4,000 RPM, especially in fifth gear.

Turning the ignition off and restarting clears the light temporarily.

I've noticed a decrease in fuel mileage.

The warm idle increased from around 900 RPM to 1,100 RPM around the same time these issues started.

The battery passed the load test and starting test, and charging voltage was 13.8 volts.

The bike came with an extra ECM. Both have matching Honda part numbers: 38770-MCS-L01.

Last night, I swapped the ECMs. Immediately, the idle dropped back to 900 RPM, and the engine sounded normal again. I rode eight miles without any issues.

Today, I rode approximately 25 miles without any problems. After stopping and restarting the bike, I noticed the idle was back up to 1,100 RPM. On the way home, I got on the interstate, went slightly above 4,000 RPM, and the FI light came back on.

I have not yet confirmed whether the returning FI light is still code 26.

I've read numerous discussions about ECM failures, knock sensors and wiring issues on these bikes. I'm curious if anyone else has experienced the higher idle in conjunction with this problem.

I'm also wondering whether the previous owner purchased the extra ECM because he was already experiencing this issue.

Before I start spending money replacing parts, I'd really appreciate hearing from anyone who has successfully resolved this problem.

Also, if anyone recognizes this motorcycle from northwest Georgia or knows the previous owner, please reach out. I'd love to learn more about its maintenance and repair history.

I bought the ST1300 because of its reputation for reliability and longevity. I really like the motorcycle and want to get this issue resolved so I can confidently put some miles on it.

Thanks in advance for any help!
 

Attachments

  • IMG_8776.jpeg
    IMG_8776.jpeg
    383.3 KB · Views: 2
The ‘ECM Failure poll and discussion’ link on the site is an excellent starting point, I believe
 
Back
Top Bottom