Found a listing on eBay for an ABS control module, and got to thinking if it would be worth it to convert my conventional system to ABS? Looks like I would need the ECU and Pulsar ring and sensor. Assume the wiring harness and possibly indicator dash light would already be there? Is it worth the effort?
ABS Brake Conversion?
- Thread starter memays
- Start date
Uncle Phil
Site Supporter
I can't address the ST1300 conversion but I have done a ST1100 standard to ABSII conversion.
I would not recommend trying it unless you have a complete ABS parts bike.
There will be things that you need - pumps, relays, mounting brackets, etc. - that you can't get anywhere else except from a donor bike.
On the ST1100, the ABSII wiring harness is a different one than on the standard which requires removing the old one and installing a new one.
It probably can be done, but it will not be done quickly nor is the project for the 'faint of heart'.
I would not recommend trying it unless you have a complete ABS parts bike.
There will be things that you need - pumps, relays, mounting brackets, etc. - that you can't get anywhere else except from a donor bike.
On the ST1100, the ABSII wiring harness is a different one than on the standard which requires removing the old one and installing a new one.
It probably can be done, but it will not be done quickly nor is the project for the 'faint of heart'.