Escort 8500 reads 1 volt lower than actual?

Joined
Dec 8, 2007
Messages
61
Location
Jacksonville, Alabama
I was messing around with my 8500 X50 and it scared me for a bit. I thought my 28 amper was tanking. The volt meter feature reads exactly 1 volt low while running, the bike puts out 14.66 volts per my volt meter and the 8500 reads 13.66 volts running and 10.6 volts with the engine off. My hand held meter never showed any thing under 12.48?? My AP-2 reads the same as the battery.

Anybody notice the crappy voltage feature on the 8500?
 

Rob Hephner

Mobile Pest Control
Joined
Feb 24, 2005
Messages
1,094
Age
57
Location
Show Low, AZ
Bike
ST1300
STOC #
5509
Are you reading the voltage off of the battery or off of the little wires connected to the detector?
 

wjbertrand

Ventura Highway
Joined
Feb 8, 2005
Messages
4,425
Location
Ventura, CA
Where is your 8500 wired in? On my 1300 I have the 8500 connected to the accessory harness and it will read anywhere from 0.5 to 1.5 volts lower (depending on accessory use) than my Datel meter which is connected directly to the battery.

You won't get true battery voltage unless you wire the 8500 directly to the battery. You'll just get the voltage in whatever circuit you have it connected to instead.
 

Rob Hephner

Mobile Pest Control
Joined
Feb 24, 2005
Messages
1,094
Age
57
Location
Show Low, AZ
Bike
ST1300
STOC #
5509
Plus you'll probably see a drop just because of the wire size.

If you want an accurate voltage reading, get a dedicated voltage meter....and don't expect it to tell you when there are police around. ;)
 

nm6r

Blue is faster!!!
Joined
Dec 8, 2004
Messages
1,332
Location
NM
It's probably the voltage drop in the small wiring.

I found the Datel voltmeter to be a nice addition to my ST1300.



Ray
 
Joined
Dec 9, 2004
Messages
109
Location
Texas U.S.A.
Bike
ST 1100
STOC #
4889
I know you guys are talking about the 1300. but...

On my 1100 using the fuse box accessory tap, the Escort will loose about 1.0 volt. Using 14 gauge wire and a relay for all my accessories, the Escort show 14.5-14.6 above 2,500 RPM. With HotGrips on high and two 55W mirror mounted lights it cycles to 14.1-14.3 volts.
 

jdpfms

JD Power
Joined
Jan 19, 2005
Messages
336
Location
New Bern, NC
Bike
ST1300A&FJR1300
I was messing around with my 8500 X50 and it scared me for a bit. I thought my 28 amper was tanking. The volt meter feature reads exactly 1 volt low while running, the bike puts out 14.66 volts per my volt meter and the 8500 reads 13.66 volts running and 10.6 volts with the engine off. My hand held meter never showed any thing under 12.48?? My AP-2 reads the same as the battery.

Anybody notice the crappy voltage feature on the 8500?
Yep, mine does that too. I've got a voltmeter to the battery, and I programed the 8500 to see voltage and was wishing I hadn't, LOL.

JDP
 

wjbertrand

Ventura Highway
Joined
Feb 8, 2005
Messages
4,425
Location
Ventura, CA
I connected the 8500 directly to the battery and its still 1 volt low. I guess its the tiny wires.
That's weird. If I use my cigar lighter adapter (connected directly to the battery) instead of my hard-wired connection to the accessory harness, the 8500's volt reading equals the Datel.
 
Joined
May 28, 2006
Messages
125
Location
Raynham, MA
STOC #
6302
Just started to use the voltage meter function this Winter. Since I haven't ridden the bike since January all of the work has been in my car. Voltage is dead on! Checked it with a meter because I thought 14.6-15.2 was too high a charge rate. Dealer tells me all is fine on that front.
 

jdpfms

JD Power
Joined
Jan 19, 2005
Messages
336
Location
New Bern, NC
Bike
ST1300A&FJR1300
I was messing around with my 8500 X50 and it scared me for a bit. I thought my 28 amper was tanking. The volt meter feature reads exactly 1 volt low while running, the bike puts out 14.66 volts per my volt meter and the 8500 reads 13.66 volts running and 10.6 volts with the engine off. My hand held meter never showed any thing under 12.48?? My AP-2 reads the same as the battery.

Anybody notice the crappy voltage feature on the 8500?
Yeah, I set up my 8500 to show voltage too in addition to the little 5 feature voltmeter I already have. It consistently was like yours about 1 volt less so I just stopped using it.

JDP
 
OP
OP
sagedrifter
Joined
Dec 8, 2007
Messages
61
Location
Jacksonville, Alabama
Yep, I installed a Datel meter and it reads pretty close to my multi meter. The 8500 reads one volt low still. I keep it on the setting where it shows the frequency, I've noticed most of the time the men giving out tickets use ka at 36K. 24K is used at those your speed is trailers and some grocery stores....
 
Top Bottom