Front turn signal connector

Woonjas

Woonjas

Joined
Jul 12, 2011
Messages
141
Location
Canton, Mississippi
Bike
1990 Yamaha XTZ750
One of the three wires to the turn signal connector has broken off right at the connector making it almost impossible to fix.
Is it possible to get a new connector that fits the turn signal socket?
 
Mine had issues. I'm a cheap pastard and I couldn't justify the money to keep everything OEM. It's not like my ST will be entering a concord de'elegance judging competition.

So I just snipped the wires, bought a small housing 3-pin molex type plug and replaced the whole OEM connector set-up. Signals still function, plastics still dismantles, the world turns as designed and I spent a 1/10th the money replacement OEM connectors would cost.

Just a thought...
 
Thanks guys, I'll check out those links.
You don't happen to know what type that connector is called do you?
 
Woonjas said:
Thanks guys, I'll check out those links.
You don't happen to know what type that connector is called do you?
Click to expand...
I don't recall off hand what it looks like, but Eastern Beaver has pictures of nearly everything it could possibly be.

Ciao,
 
From ST1300A ....I can recommend Joe at Cycle Terminal. I have bought several of the stock connectors for my ST1100 from him, along with crimpers and such. Makes it easy to tie into the stock connections!

This is a great source! Thanks for sharing!
 
Iirc, they are called Hitachi connectors. On a Honda? Go figure. And I bought mine from E. Beaver - but be forewarned that shipping will probably be north of $20. It pays to buy a lot of stuff from them so that the shipping cost is a lower percentage of the merchandise cost. Go in with a friend, and buy extra pins (you will be surprised how many you ruin). There are a couple of other vendors who sell these things. Try googling Hitachi connector and browse....
 
You must log in or register to reply here.
Back
Top Bottom