Heated Corbin Seat Hook up "HELP"

[stfreak]

Trying to wire a Corbin Heat Seat to an 07 ST1300. Seat only had the female connection on it. I purchased a waterproof connector with an in line fuse.
Now I need help hooking it up to an accessery so that the seat will only work when the key is on. Does someone have a link to help me with this. Thanks ahead for any help.

 

[nakerr]

Trying to wire a Corbin Heat Seat to an 07 ST1300. Seat only had the female connection on it. I purchased a waterproof connector with an in line fuse.
Now I need help hooking it up to an accessery so that the seat will only work when the key is on. Does someone have a link to help me with this. Thanks ahead for any help.

Installation instructions are linked from this Corbin page:

http://corbin.com/honda/st13smug.shtml

My seat came with a wiring y-adaptor that plugged into a fuze position on the ST1300 and the original wire there plugged into that and there is a wire for the seat that has an inline fuse in the lead to the seat.

 

[970mike]

I have a Corbin heated seat that is wired into my accessory fuse block at the rear of my bike that is powered when the key is on. I got my fuse holder bracket from MCL OUT OF BUSINESS - DO NOT ORDER Here is the link http://www.MCL OUT OF BUSINESS - DO...n_page=product_info&cPath=1_3&products_id=309

This is a great setup and I would recommend that you get one for all of your accessories on your ST.

 

[st1300r]

+1 on installing a acc fuse panel. That way all your future mods will be triggered by the key in the on or acc position. The seat would drain a batter pretty quickly.

If you need info on the seat itself PM me I can take some pictures.

 

[yesman]

Corbin Seat- I just had a heated Corbin in stalled on my 2010 St- The mechanic said there are no connections, the conncetion points had to be "fused" together