Missing cowling piece.

[Fattylmumpkin]

What is the name of the piece that is missing from my cowling? I want to replace them (both are missing) but I don’t even know what the part is called.

 

[Gus1300]

on the '03 and '04, they're labeled as Items 9 & 10: LID, L. and R. MIDDLE COWL. Your year's part #s will likely be different but the identification should match.

 

[Sadlsor]

Sometimes called the maintenance lid.
Odd name.

 

[jfheath]

Uk fiche. £115 for the pair - for two bits of plastic. Then you have to buy the push pins - although mine are held with a bolt and captive nut.

I wonder if anyone has 3d printed these ?

Nb i think the code number includes a colour code.

'Not in stock'. means that they can be obtained.

 

[Hound]

From the Ron Ayers 2005 fiche. Check your colour code (label on frame under seat).

 

[jfheath]

Ye gods. I knew that parts in the Uk were held ridiculously high, but really - that is a massive difference.

 

[HR Cole]

Go to Ron Ayers.com and look for parts, then put in your bike info and pull up the parts fische for your bike. You can order any part for your bike you might need. When you put in your bikes year it will be the specific color you need.
There are other parts companies that use the same parts fische.

 

[dduelin]

Go to Ron Ayers.com and look for parts, then put in your bike info and pull up the parts fische for your bike. You can order any part for your bike you might need. When you put in your bikes year it will be the specific color you need.
There are other parts companies that use the same parts fische.

Most of the maintenance lids are no longer available from Honda as new stock items.

 

[docw1]

I've had to replace both of mine, last time this year. They seem to be available, at least for a 2012.

 

[Sadlsor]

Color aside, I am also of the belief (DISCLAIMER: rightly or wrongly, as usual) they are becoming more difficult to find as NOS (New Old Stock / New Original Stock), but painting them should be the least bothersome part of replacing any that you've lost.
Good luck, and let us know. Thanks.

 

[DannoXYZ]

I couldn't find any from Honda retailers, so got from Ali.



There's also a rubber piece that wraps around that on later models. Anyone have a line for on that?

 

[Sadlsor]

There's also a rubber piece that wraps around that on later models. Anyone have a line for on that?

Are you referring to the extra wind protector bits? I forget what they were called, but they went down the entire sides, left and right, as well as over the mirrors for additional weather protection. They were only in black, I think.
Those things have been unobtainable from distributors and stores for a good while, but can be found on some used bikes and occasionally in For Sale section here.

 

[Ryan_B]

There's also a rubber piece that wraps around that on later models. Anyone have a line for on that?

You can still get the rubber inserts "Deflector B", just not the full wind deflectors "Deflector A". They can be found on Ron Ayers as well, item 37 and 41. You can sometimes find them cheaper on auction sites.



Ryan

 

[HR Cole]

Still available thru Ron Ayers, added them to the cart and about checked them out!

 

[Hound]

Still available thru Ron Ayers, added them to the cart and about checked them out!

I did the same before adding the link in post #5!

 

[Hound]

For those looking for the rubber deflector panels that fit over these lids, there are a couple on eBay in the UK (but not cheap).

Honda ST1300 left hand fairing wind deflector black cover, | eBay

This wind deflector is a perfect fit for the left side of your Honda ST1300 fairing. The deflector is easy to install and maintain, making it a hassle-free addition to your motorcycle. This is the black cover wind deflector that goes over the cylinder cover.

www.ebay.co.uk

GENUINE HONDA PAN EUROPEAN ST1300 RH FAIRING INSERT WIND DEFLECTOR | eBay

St1300 right hand side insert wind deflector.

www.ebay.co.uk