Wanted Please help! Tool needed to rent!

[dhall854]

Please help me out…

I’m in need of the swing arm lock nut wrench to fit my ST1300.

Honda part 07ZMA-MCAA101 or homemade equivalent.

I will pay for shipping to and from your home for the ability to rent your tool for a hopefully short period of time.

My u-joint has failed and I’m in the process of gathering parts and tearing down the bike.

Longtime ST-Owners.com and FB STOC page member.

Feel free to send me message on Facebook Messenger or on here.

Thank you for your consideration!
️

Dale

 

[Bush]

In case you haven't looked to Partzilla regarding this and failing to find a lender, it is available there. I checked three parts sites and only Partzilla shows it in stock at this time. Otherwise classed as discontinued.

https://www.partzilla.com/product/honda/07ZMA-MCAA101

 

[Al st1100]

measure it , amazon it , cheaper than shipping 2 ways. Again measure it. https://www.amazon.com/07908-4690003-Swingarm-Removal-Wheelers-Replaces/dp/B0B3ZXL2PX/ref=sr_1_11_sspa?crid=K9QQ0SYU602A&dib=eyJ2IjoiMSJ9.U2sgv7y5K0e1IbSxmgxAp-N

 

[tpasco1995]

Looking at the tool itself, you may be able to get away with an adjustable pin spanner wrench, like this on Amazon for $9

 

[dduelin]

I think Ashley has contacted you and already mailed you my swing arm tool that he had on hand. I also have a nearly new drove shaft and a U-joint if you want it. I purchased these with a final drive that came off a 2004 ST1300 with less than 6000 miles on it. I'm always up for a ride through horse county to the Villages to deliver what you need.

 

[bdalameda]

I made one using a small hand grinder with a cut off wheel and cut slots in a socket to fit. It worked pretty well. Unfortunately I gave it to a person who had the St1300 with a bad u-joint years ago so I can't lend it to you.

 

[dhall854]

Ashley has shipped me his tool.
Thanks to all that replied!!
You guys are the best!