Uncle Phil
Site Supporter
I have attached a PDF file with pictures to help anyone who has purchased the Chinavasion GPS and IGO8 software set up the device. The instructions should also work for IGO Primo software but I haven't tried it. I also have added a Users Manual For IGO8. If I can be of any help in the process or you find mistakes in the document, just PM me.
****EDIT****11/06/2015****
Given the issues with the 'satellite' fetching of the RAGE that some folks have experienced and I have commented on, I recommend looking at the 5" unit from CHINAVASION instead of the Rage. I've found that their 5" unit syncs up very quickly and have much better backlighting than the Rage, not to mention the slightly larger screen for about the same price. They also have a nice 'hood' already built into the cradle. Slight less 'waterproof' by technical rating (IPX5 vs IPX7 for the Rage) but either rating is far above what is needed on a motorcycle unless you spend a lot of time in a carwash. The only issue I have found so far with the 5" units is that they want to come out of the cradle on rough roads so you have to be sure the security screw is well locked. I also added a little 'stopper' velcroed to the cradle as extra protection. They also run the same software as the Rage and the stuff in this thread applies to them. Hope that helps somebody along the way.
****EDIT****11/06/2015****
Given the issues with the 'satellite' fetching of the RAGE that some folks have experienced and I have commented on, I recommend looking at the 5" unit from CHINAVASION instead of the Rage. I've found that their 5" unit syncs up very quickly and have much better backlighting than the Rage, not to mention the slightly larger screen for about the same price. They also have a nice 'hood' already built into the cradle. Slight less 'waterproof' by technical rating (IPX5 vs IPX7 for the Rage) but either rating is far above what is needed on a motorcycle unless you spend a lot of time in a carwash. The only issue I have found so far with the 5" units is that they want to come out of the cradle on rough roads so you have to be sure the security screw is well locked. I also added a little 'stopper' velcroed to the cradle as extra protection. They also run the same software as the Rage and the stuff in this thread applies to them. Hope that helps somebody along the way.
Attachments
Last edited: