Wanted ST1100 Clock Light Bulb (Honda P/N: 34908-MT3-003 Bulb; T-5, 1.4W)

Joined
Jul 30, 2007
Messages
29
Location
San Diego, CA
Forum Members:

Hello. Multiple attempts to purchase an ST1100 clock bulb via Honda have failed. The bulb is no longer available from Honda.
Comparable T-5 bulbs are available via Amazon, but they are not 1.4W bulbs. NAPA did not list the bulb.

If you are aware of a vendor with a comparable bulb or have a spare T-5, 1.4W bulb you may sell, please contact me or reply to this post.

Thank you!
 
David, I think I simply used a generic wedge #74 bulb. Don't remember where it came from. I may have gotten a few. It's been a while. I'll have a look around.

Regarding your pannier rail request, do mean just that plastic flip up flap thing, or the 'rail' that the bags hang on ?
 
Well, generic T5 bulbs mostly come in 1.2W, the 1.4W is specific...

located a Philips with 1.4W type if that helps, but don't know if those match the required vibration resistance...


same disclaimer on the Sylvania:

 
I'd be throwing in whatevers cheap and handy.
Yeah... so you'll replace them often and frequent...
You all can again roll out the inquisition, with torches and pitchforks against me, for stating that the OEM bulbs are of superior quality and vibration resistance, thus will last many, many years/miles...
The generic ones OTOH no so much...
 
yeah, you say that now, but what happens one day when you're riding all night long, bank it into a curve, and suddenly you can't tell what time it is. I can't think of a more terrifying experience.
:roflmao-2x: :roflmao-2x: :roflmao-2x: :roflmao-2x: :roflmao-2x:

Did not see that coming.
 
yeah, you say that now, but what happens one day when you're riding all night long, bank it into a curve, and suddenly you can't tell what time it is. I can't think of a more terrifying experience.
*butt pucker factor x10, 000*
 
Back
Top Bottom