ST1100 Repair Manual

[Ralphstboy]

G'day,
as mentioned in my intro I intend slipping an ST1100 into my scratch build Trike, naturally I've got numerous questions most of which I could answer myself with a manual, so could anyone help me out with a link to a manual pdf please?
Check out my Trike, you might get the but too, Joe.

 

[DeanR]

http://www.sharetheexperience.co.uk/ST1100/

 

[Ralphstboy]

Hey DeanR, thanks for that mate, I'll check it out, Joe.

 

[TerryS]

I think an ST1100 engine will make for quite an upgrade from the CX500 that you have in there at present. Hang on!

Great looking trike.

Here's a dropbox link to the manual as a single .pdf file.

https://www.dropbox.com/s/ys9os2aojtk7e6x/ST1100 Service Manual.pdf?dl=0

 

[Ralphstboy]

G'day Terry,
glad you like my Trike, it goes really well considering it only has 50 horses, we always drive it two up with my son driving, strangely I'm more at home driving my 83 classic Mini but that's another story.
Thanks for the link to the single .pdf I'll get it, I downloaded sections from the .pdf that Dean gave me and see that although similar to the CX things are opposite, like male instead of female splines etc.
I fabricated a single sided swing arm to facilitate easy wheel removal + a 205 tyre, the rear wheel is chain driven off the centrally mounted CX bevel box and after checking the ST gear ratios I may keep ti
the overall 1st gear ratio for the ST is 11.741, now that wont cut it as it's too high for easy or hill starts my CX bevel gives 12.806 which is almost there but still too high so I might have to increase the size of the rear sprocket to get nearer 15:1
see you later Joe.