WAX ASSY St1300 2004

blueboy

blueboy

Joined
Dec 29, 2017
Messages
18
Location
Ireland
Hi all,

Havent posted in ages but do follow along.

Quick question. Im about to pull TB off as I have a leak in the vee and want to see where its coming from.

(No the mat is not trapped in the covers).

I noticed the rubber cover on the top of my wax assy is half missing. Anyone ever replaced that or know where that rubber can be found.

Even something approximate.
 

Attachments

  • wax assy.PNG
    wax assy.PNG
    312.6 KB · Views: 23
Honda lists the wax assembly as a single part. Your best bet might be to find a used unit online and get the rubber seal from it. Given how much gunk can collect under the throttle body I'd want to have the moving parts covered.
 
Camrysandcoffee said:
Honda lists the wax assembly as a single part. Your best bet might be to find a used unit online and get the rubber seal from it. Given how much gunk can collect under the throttle body I'd want to have the moving parts covered.
Click to expand...
I did look on Ebay but not a lot available. Anything in the US is just too expensive to get here.

There is one in the UK but on close inspection of the photo the rubber seems to be broken.

I feel some creative thinking coming on :D
 
I started by looking on McMaster-Carr for a gland or similar rubber shaft seal, but either it's not a component they stock, or I don't know how to describe properly for their inventory.

This is what you're looking for, correct?

1749234666277.png
 
I’m pretty sure I have one in the garage, but not sure how to ship/mail it all the way to you.
If I find it, you can have it if you pay shipping.
 
STRider said:
I started by looking on McMaster-Carr for a gland or similar rubber shaft seal, but either it's not a component they stock, or I don't know how to describe properly for their inventory.

This is what you're looking for, correct?

1749234666277.png
Click to expand...
Thats a good Idea. We dont have McMAster over here but I am aware of it. Yes its just the rubber I need.
 
Igofar said:
I’m pretty sure I have one in the garage, but not sure how to ship/mail it all the way to you.
If I find it, you can have it if you pay shipping.
Click to expand...
That would be great. And its only the rubber I need so would be a very small package.

Mike.
 
I am in Tucson Arizona USA
See if you can figure out how to ship or mail something to you.
I’ll try and locate it today.
 
You must log in or register to reply here.
Back
Top Bottom