Windshield mounts alignment out

ATA

ATA

Joined
Sep 12, 2018
Messages
283
Location
Atlanta, GA
Bike
2007 ST1300
Anyone have an answer for my out of alignment windscreen mounting arms? The windshield was sticking, so I removed it and popped up the inner black plastic cover and lubricated the cable/track area. Started working smooth. Problem is I ran it up and down a couple of times to check it and it got out of alignment. One side higher than the other. I can't even mount the windshield now.
Any idea of how to adjust the mounting arms?
Thanks!
Alan
 
Larry Fine said:
Run them all the way up or all the way down?
Click to expand...
The left mount (as you’re sitting on the bike) is very high. The micro switches for top/bottom are on the right side, so it won’t go up much now due to the left side being so high.
 
Intouch with “Andiwhack” & will visit him tomorrow. He’s way more experienced on the ST maintenance than me. Hopefully we’ll get them back in alignment.
 
ATA said:
Intouch with “Andiwhack” & will visit him tomorrow. He’s way more experienced on the ST maintenance than me. Hopefully we’ll get them back in alignment.
Click to expand...

It can be realigned. But if you still want it to be adjustable, some parts may have to be replaced.

In the best case, a good cleaning might get it going for a while if you are careful and do not adjust at speed.
 
You must log in or register to reply here.
Back
Top Bottom