Phone holder...

punchy6538

Punchy
Joined
Jul 17, 2023
Messages
24
Age
64
Location
Lancashire UK
Bike
St1100 1991
Hi, anyone recommend a decent phone holder/ attachment and where to fix it, seems pretty short on space on the handlebars.. thanks..
 
I have my old Garmin in its RAM cradle, my not-a-phone GPS in a RAM X-grip, and the heated grip controller all attached to the clutch lever bracket/reservoir lid:

6p2mf13l.jpg


tUQqEMTl.jpg


The X-grip is on a stubby arm while the Garmin is on the regular 4" arm. The grip controller is on a custom bracket to get it in a better position.
 
Willsmotorcycle said:
I've been "worried" about the vibration, but 20k plus miles and my phone hasn't complained. Let me know how it works.
Click to expand...
Yours is on the dash so isn't getting the harsh vibrations transferred from the wheel/front suspension to the bars.. I used on my NatSTOC trip and worked fine. I figure at $20 is was fairly cheap insurance vs the phone cost lol.
 
You might want to consider the 'Perfect Squeeze" phone holder. I have one mounted via a ram system to my handlebar and it works great. A bit pricey but then so is a phone that falls off (DAMHIKT).
hondogarage.com

Perfect Squeeze Phone Mount

Simply put, this is the best off-road phone mount you can buy. We designed it specifically for off-road motorcycle riders and racers who want to use their phones as a GPS. You can ride the track or the gnarliest washboard and your phone won't budge, but when you stop for lunch it's easy to pop...
hondogarage.com hondogarage.com
 
I've got a Perfect Squeeze and while a well made bit of kit it's a lot of overkill for a street bike mounted phone. I replaced it with a Tackform from MotorCycle Dave. The Tackform is an outstanding holder. It holds well and can easily be used with one hand. I don't know if/that there's a shock absorber available. My mount is on the riser and not the bars so vibration might be less. Anyway I like the tacform much better than the Perfect Sqeeze.
 
Willsmotorcycle said:
I can only speak to the ST1300, I went for a shelf and the Quad Lock with the "wireless" charger. View attachment 317135
Click to expand...
Hey @Willsmotorcycle and @Mellow what's the ball behind the Quadlock head? I'm looking to do the same, but like you I have RAM component's and the QL balls are 22mm while the RAMs are 1" (25.4mm). QL says, Please note: The Dual Pivot Arms are not designed to be compatible with RAM mounting systems, please see the 1" Ball Adaptor for a compatible solution."

Do smaller QL balls play nice with RAM arms that use the 1"/25mm balls? I expect they could but have no firsthand experience.
 
STRider said:
Hey @Willsmotorcycle and @Mellow what's the ball behind the Quadlock head? I'm looking to do the same, but like you I have RAM component's and the QL balls are 22mm while the RAMs are 1" (25.4mm). QL says, Please note: The Dual Pivot Arms are not designed to be compatible with RAM mounting systems, please see the 1" Ball Adaptor for a compatible solution."

Do smaller QL balls play nice with RAM arms that use the 1"/25mm balls? I expect they could but have no firsthand experience.
Click to expand...
Mine uses a bar mount not a ram mount as I have risers on my RT that has a bar-like section. I believe they are standard 1" ram balls on Wills.


 
STRider said:
Hey @Willsmotorcycle and @Mellow what's the ball behind the Quadlock head? I'm looking to do the same, but like you I have RAM component's and the QL balls are 22mm while the RAMs are 1" (25.4mm). QL says, Please note: The Dual Pivot Arms are not designed to be compatible with RAM mounting systems, please see the 1" Ball Adaptor for a compatible solution."

Do smaller QL balls play nice with RAM arms that use the 1"/25mm balls? I expect they could but have no firsthand experience.
Click to expand...
Tom, I had no idea what you were talking about lol, I had to read it a few times. I looked at my history and yes, I bought the 1" ball adapter. Joe is on top of it as usual! Nice Joe!

 
How secure is the quadlock attachment to the back of the phone (the glue on part)? My main phone does not have a smooth back so I was a bit leery of that so didn't buy one.
 
drrod said:
How secure is the quadlock attachment to the back of the phone (the glue on part)? My main phone does not have a smooth back so I was a bit leery of that so didn't buy one.
Click to expand...
I have a case specific for my phone, super secure, no glue. I figure it has to work and the phones expensive, not a place I'm trying to skimp, I'd rather cut corners in other places. Not implying you're trying to save money, just my perspective.
 
Willsmotorcycle said:
I have a case specific for my phone, super secure, no glue. I figure it has to work and the phones expensive, not a place I'm trying to skimp, I'd rather cut corners in other places. Not implying you're trying to save money, just my perspective.
Click to expand...
That would work. Unfortunately, they do not have a case that fits my phone.
The Perfect Squeeze works well for me though.
 
You must log in or register to reply here.
Back
Top Bottom