My original set of carbs were gummed up after sitting for several years,so found a clean set on Ebay.Inspected diaphragms,cleaned float chambers(they were clean) replaced float bowl gaskets,checked set floats,didn't touch jets,new insulator bands,removed PAIR system.Synced carbs,as close I could get them,but can't get them to hold a consistent idle.Ranges from 900-1500.
On the road bike runs smoothly except below 2k.Rideable but trying to get smoother.The idle will hold,bike will start with full choke and run on it's own when warm.I'll check for obvious vacuum leaks and such.Any other suggestions other than pulling the set.Looking to do anything external before resorting to digging into the jets.
On the road bike runs smoothly except below 2k.Rideable but trying to get smoother.The idle will hold,bike will start with full choke and run on it's own when warm.I'll check for obvious vacuum leaks and such.Any other suggestions other than pulling the set.Looking to do anything external before resorting to digging into the jets.