So I installed the Airtex today. Will update this thread with a few pics once I get them uploaded, but do have a question....there is one mention of the vent hose in one of the posts in this thread and in both pictures of the two forum members that took a shot of their pump placed in the bracket just before it was re-inserted into the tank, neither pic has the vent hose in it. The Airtex doesn't have anywhere to attach a vent hose, so I'm assuming it is just taken out completely?
It appears that the nipple just inside the lower part of the tank that you can see after you unbolt the plate that is attached to the pump...the one that the vent hose attached to...it appears it turns towards the front of the bike and stays inside the tank. Does it just go somewhere higher in the upper portion of the tank? Is that what you can see when you take the filler cap off and peer in?
It appears that the nipple just inside the lower part of the tank that you can see after you unbolt the plate that is attached to the pump...the one that the vent hose attached to...it appears it turns towards the front of the bike and stays inside the tank. Does it just go somewhere higher in the upper portion of the tank? Is that what you can see when you take the filler cap off and peer in?