The bike had a fault that I traced to the front wheel sensor which I replaced.
On the test run after replacement, the ABS light which was flashing prior to replacement was eliminated but now the ABS is active at low speed (below 10mph) you can hear the clicking of the ABS and the pumping action on the brake lever.
Anyone experienced this before? I have read the manual and it does not mention how to cure this problem. I would be greatfull if anyone could help.
Philpat
On the test run after replacement, the ABS light which was flashing prior to replacement was eliminated but now the ABS is active at low speed (below 10mph) you can hear the clicking of the ABS and the pumping action on the brake lever.
Anyone experienced this before? I have read the manual and it does not mention how to cure this problem. I would be greatfull if anyone could help.
Philpat