Hi all,
Finally scratched together the $ the take on the 40 amp upgrade.
Am planning on doing a full service and all bearings while at it.
Part 1, I'll attack the rear-end,Alt,swing arm,rear wheel bearings,drive shaft service, rear brakes.
Part 2,will be valve check-adjust,possibly timing chain,carb sync,plugs,front wheel bearings/brakes,dump all fluids
Part-3 Add some friggin farkles! Heated grips,driving lights,outlet or 2
Ive read the threads about the the upgrade and Mike M's article about the swing arm service,this is the list of parts I ordered,any thing I'm missing o
13411-MAJ-G20 SHAFT
* 11202-MAJ-G20 ALTERNATOR BASE
* 91004-MT3-003 BEARING (20x47x10.5)
* 31100-MAJ-G41 ALTERNATOR ASSY.
* 91302-MM4-003 O-RING (90x2.3)
* 32130-MAJ-G40 SUB-HARNESS, ALTNTR
* 95701-08070-00 BOLT, FLANGE (8X70) - quantity: 3
* 94001-06080-0S NUT, HEX, (6MM
38270-MAJ-G40, BOX ASSY., MAIN FUSE
* 38260-MAJ-G20, STAY B, FUSE BOX
* The fuseblock comes with two fuses:
o 98200-65500, FUSE G (55A)
* 93891-06016-08, SCREW-WASHER (6X16)
* 95701-06012-00, BOLT, FLANGE (6X12) - quantity: 2
* 90153-SB2-003, SCREW-WASHER (5X10) - quantity: 2
* 91358-MG9-003 O-RING (50.5X3.5)
* 91302-MA6-003 O-RING (61X2)
* 91356-MG9-003 O-RING (39.5X2.4)
* 40210-MT3-000 CAP, PROPELLER SHAFT
* 91361-MT3-003 O-RING (22.1X1.9)
* 91263-MT3-005 OIL SEAL (30X43X7)
Other than bearing 91066-HA7-672 ,am I missing anything?
Any suggestions,silly comments?
I'll be requesting the tool kit,probably late June from John O once I get SA bearings,but before I ordered I wanted to check with y'all,....
Thanks,
Michael
Finally scratched together the $ the take on the 40 amp upgrade.
Am planning on doing a full service and all bearings while at it.
Part 1, I'll attack the rear-end,Alt,swing arm,rear wheel bearings,drive shaft service, rear brakes.
Part 2,will be valve check-adjust,possibly timing chain,carb sync,plugs,front wheel bearings/brakes,dump all fluids
Part-3 Add some friggin farkles! Heated grips,driving lights,outlet or 2
Ive read the threads about the the upgrade and Mike M's article about the swing arm service,this is the list of parts I ordered,any thing I'm missing o
13411-MAJ-G20 SHAFT
* 11202-MAJ-G20 ALTERNATOR BASE
* 91004-MT3-003 BEARING (20x47x10.5)
* 31100-MAJ-G41 ALTERNATOR ASSY.
* 91302-MM4-003 O-RING (90x2.3)
* 32130-MAJ-G40 SUB-HARNESS, ALTNTR
* 95701-08070-00 BOLT, FLANGE (8X70) - quantity: 3
* 94001-06080-0S NUT, HEX, (6MM
38270-MAJ-G40, BOX ASSY., MAIN FUSE
* 38260-MAJ-G20, STAY B, FUSE BOX
* The fuseblock comes with two fuses:
o 98200-65500, FUSE G (55A)
* 93891-06016-08, SCREW-WASHER (6X16)
* 95701-06012-00, BOLT, FLANGE (6X12) - quantity: 2
* 90153-SB2-003, SCREW-WASHER (5X10) - quantity: 2
* 91358-MG9-003 O-RING (50.5X3.5)
* 91302-MA6-003 O-RING (61X2)
* 91356-MG9-003 O-RING (39.5X2.4)
* 40210-MT3-000 CAP, PROPELLER SHAFT
* 91361-MT3-003 O-RING (22.1X1.9)
* 91263-MT3-005 OIL SEAL (30X43X7)
Other than bearing 91066-HA7-672 ,am I missing anything?
Any suggestions,silly comments?
I'll be requesting the tool kit,probably late June from John O once I get SA bearings,but before I ordered I wanted to check with y'all,....
Thanks,
Michael