After being parked over the winter I moved my 07 ST1300 out of storage and started some maintenance. When I got around to the clutch lever there was no resistance. The oil is clean and full but when I put the bike in 1st and pulled the lever in the bike would not move. I did pump the lever many times, bike not running, pushing it in 1st gear with the lever in, but the tire would not move.
Put it on the center stand and started the engine, shifted to 1st gear with the clutch lever in but the tire took off.
All was OK when parked.
Friday I will bleed the clutch fluid and see if there is oil pressure when I work the lever.
Any suggestions???
Bill
Put it on the center stand and started the engine, shifted to 1st gear with the clutch lever in but the tire took off.
All was OK when parked.
Friday I will bleed the clutch fluid and see if there is oil pressure when I work the lever.
Any suggestions???
Bill