Hi... this one is a bit perplexing to me.
2005 ST1300. Just turned 60k miles. Seems to be in pretty darn good shape, no leaks all runs smooth, starts promptly and idles fine. 3 bars and only 3 bars ont he temperature.
But after some extended high speed runs, say 20 minutes at 90+ mph the FI light comes on solid and stays there until I do an extended shut down (extended being like a minute plus, not a quick on/off).
I can run at 85 (indicated) for an hour and no problem.
But if I run 90~100 for awhile, I get the FI light lit and it stays on until I shut the bike off for a minute. I tried just shutting it off and then restarting while riding (pop the clutch at slow speed) but it returned to on.
Any ideas?
2005 ST1300. Just turned 60k miles. Seems to be in pretty darn good shape, no leaks all runs smooth, starts promptly and idles fine. 3 bars and only 3 bars ont he temperature.
But after some extended high speed runs, say 20 minutes at 90+ mph the FI light comes on solid and stays there until I do an extended shut down (extended being like a minute plus, not a quick on/off).
I can run at 85 (indicated) for an hour and no problem.
But if I run 90~100 for awhile, I get the FI light lit and it stays on until I shut the bike off for a minute. I tried just shutting it off and then restarting while riding (pop the clutch at slow speed) but it returned to on.
Any ideas?