- Joined
- Sep 26, 2011
- Messages
- 757
- Location
- Springville, Indiana
- Bike
- 2000 ST1100
- 2024 Miles
- 001743
- STOC #
- 8497
Getting things ready for steering head bearing replacement. Going to do the fork seals & replace the springs while I have the forks off.
Great tip on using the coat hangers to hold the brakes!
I have done the headlight ground mod, ran it to both lights.
Going to replace the bushings while I have the forks apart.
No real problems getting the forks off or apart, just buggerd one of the bottom bolts. Note to others, Don't use a hex socket driver with the ball end on it. After I ground the ball end off, and hammerd it into the bolt, it came out with my big air impact gun.
Great tip on using the coat hangers to hold the brakes!
I have done the headlight ground mod, ran it to both lights.
Going to replace the bushings while I have the forks apart.
No real problems getting the forks off or apart, just buggerd one of the bottom bolts. Note to others, Don't use a hex socket driver with the ball end on it. After I ground the ball end off, and hammerd it into the bolt, it came out with my big air impact gun.